Product page
Radial shaft seal SKF 42X72X8 HMSA10 V
- Manufacturer Part Number
- 42X72X8 HMSA10 V
- Brand
- SKFOfficial brand
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF 42X72X8 HMSA10 V is a radial shaft seal reference, within Seals. Request a quote for 42X72X8 HMSA10 V via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
SKF HMSA10 V series radial shaft seals are single-lip spring-loaded seals designed for rotating shafts. Their function is to retain lubricant and exclude contaminants in gearboxes, pumps, electric motors and reducers. The HMSA10 V designation indicates a seal with an elastomer lip and spring, suitable for general applications. MR Accesorios Industriales offers this line as part of its industrial sealing range.
The designation of these seals follows the format inner diameter x outer diameter x width, followed by the series code. For example, 8X22X7 HMSA10 V corresponds to a seal for an 8 mm shaft, 22 mm housing and 7 mm width. The HMSA10 V suffix identifies the construction: elastomer sealing lip, steel spring and metal case. This nomenclature allows the main dimensions and characteristics to be identified quickly.
These seals are used in a wide variety of industrial equipment in Argentina. They are common in gearboxes, centrifugal pumps, electric motors, compressors and spindles. Industries such as food, chemical, petrochemical and manufacturing use them to protect bearings and gears. Their versatile design makes them suitable for both oil and grease applications, provided speed and temperature conditions are respected.
To correctly select a seal, it is essential to verify the shaft and housing dimensions, as well as the operating conditions. The lip must be mounted with the spring toward the side of the fluid to be retained. During installation, it is recommended to lubricate the lip, use suitable tools to avoid damage and ensure alignment perpendicular to the shaft. Cleanliness of the area and the condition of the shaft surface are critical for effective sealing.
Regarding equivalences, SKF HMSA10 V seals can be interchanged with products from other manufacturers that follow the same dimensional designation and construction type. It is important to compare not only the dimensions but also the lip material and spring type. For specific applications, consult our technical team to validate interchangeability.
To request a quote for SKF HMSA10 V radial shaft seals, send the complete code by WhatsApp to MR Accesorios Industriales. Our team will reply promptly with the information needed for your purchase.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the HMSA10 V designation mean?
- HMSA10 V identifies a radial shaft seal with an elastomer lip and spring, of standard construction. The final V indicates a design variant. It is a SKF-specific nomenclature for this series.
- How do I choose the right seal for my application?
- You should consider the shaft and housing dimensions, the type of lubricant, speed and temperature. Also the degree of contamination. Consult us with the data for your equipment so we can advise you.
- Are SKF HMSA10 V seals interchangeable with other brands?
- They can be if dimensions and construction type match. Check the lip material and spring. Not all seals with the same dimensions are equivalent in performance. Consult our technical team.