SKF 41X62X12 D8 P radial shaft seal
- Brand
- SKF
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF 41X62X12 D8 P is a reference of radial shaft seal, within Seals. Request a quote for 41X62X12 D8 P via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF radial shaft seal D P series is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the assembly and prevent the ingress of dust, water or particles. It is press-fitted into the housing and its flexible lip runs on the shaft, compensating for minor misalignments. It is a key component in pumps, electric motors, gearboxes and industrial equipment where sealing integrity is critical to bearing service life.
The designation of these seals combines dimensions and suffixes. For example, 41X62X12 D8 P indicates a bore diameter of 41 mm, an outside diameter of 62 mm and a width of 12 mm. The suffix D8 identifies the lip design and the elastomer material, while P indicates a construction variant. Knowing these codes allows you to select the correct seal according to the available space and operating conditions.
In Argentine industry, SKF radial shaft seals are used in a wide variety of applications: centrifugal pumps, electric motors, speed reducers, compressors, machine tools and transmission equipment. They are also present in the food, chemical and petrochemical sectors, where containing lubricants and excluding contaminants are essential to maintaining operational reliability.
To select a seal, check the shaft diameter, the housing and the available width. The lip must run on a ground and lubricated surface. During installation, ensure perpendicular alignment to the shaft and avoid damaging the lip. Proper lubrication and correct sealing extend bearing service life and reduce unplanned downtime.
SKF seals are interchangeable with those of other recognized brands, provided the dimensions and lip type match. MR Accesorios Industriales carries this brand as part of its seals and oil seals line, and can advise you on equivalence with other codes. If your seal is not listed, contact us and we will look it up by size or application.
If you need an SKF radial shaft seal D P series, send the code or dimensions via WhatsApp to MR Accesorios Industriales. We will quote you promptly and help you find the right part for your equipment.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- How do I identify the seal I need?
- Measure the shaft diameter, the housing outside diameter and the width. With that data and the code engraved on the seal, we can identify the D P series. If you do not have the code, send us the dimensions via WhatsApp and we will help you select it.
- What does the suffix D8 P mean in the designation?
- The suffix D8 indicates the lip design and the elastomer material, while P indicates a construction variant. These codes are specific to SKF and allow distinguishing configurations within the same series. Contact us if you need to interpret a particular code.
- Are SKF seals compatible with other brands?
- Yes, in general they are interchangeable with seals from other brands as long as the dimensions and lip type match. It is important to verify the bore, outside diameter and width, as well as the material and lip design to ensure correct sealing.