Product page
V-ring seal SKF 400 VL V
- Manufacturer Part Number
- 400 VL V
- Brand
- SKFOfficial brand
- Category
- Seals
- Subcategory
- V-ring seals
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF 400 VL V is a v-ring seal reference, within Seals. Request a quote for 400 VL V via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
SKF V-ring seals of the VL V series are axial V-lip seals that mount directly on the shaft and seal against a perpendicular face. Their elastic, springless design makes them ideal for protecting bearings and guides in environments with dust, water or chips. At MR Accesorios Industriales we supply this line for industrial applications that demand a reliable, easy-to-install barrier.
The VL V series designation is read with the number indicating the shaft diameter in millimeters, followed by the letters VL V that identify the seal profile. For example, 140 VL V corresponds to a seal for a 140 mm shaft, while 250 VL V is for a 250 mm shaft. The VL V suffix defines the lip geometry and material, and should not be confused with other series in the same family.
These seals are used in a wide variety of industries in Argentina, such as food, cement, mining and steel. They protect bearings in conveyors, mixers, pumps, gearboxes and process equipment. Their ability to work with moderate misalignment and high speeds makes them suitable for demanding environments where dust, water or chemical agents are present.
To select the right V-ring seal, take into account the shaft diameter, rotation speed, operating temperature and type of contaminant. Installation is done on the shaft, with the lip in contact with a machined perpendicular face. It is important to verify the concentricity and surface finish of the sealing face, as well as adequate lubrication to reduce wear.
As for equivalences, SKF VL V series V-ring seals can be interchanged with products from other brands that follow the same dimensional designation, but always verify tolerances and material. MR Accesorios Industriales supplies this brand as part of its seals and oil seals line, and can advise you on the best option for your equipment.
If you need an SKF VL V series V-ring seal, send us the full part number on WhatsApp and we will quote you shortly. At MR Accesorios Industriales we have more than 80 years of experience in the field and we help you find the right solution for your application.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the VL V designation mean in SKF seals?
- VL V identifies SKF's V-ring seal series. The number preceding it indicates the shaft diameter in millimeters. For example, 140 VL V is for a 140 mm shaft. This nomenclature makes selection by shaft size easier.
- How is an SKF V-ring seal installed?
- The seal is mounted on the shaft, with the lip in contact with a machined perpendicular face. It does not require adhesives or additional fasteners. It is important to ensure correct alignment and a sealing surface in good condition to prevent leaks.
- Where can I ask for a quote on SKF V-ring seals?
- You can contact us on WhatsApp by sending the part number of the seal you need. At MR Accesorios Industriales we provide technical advice and a personalized quote. Write to us and we will reply shortly.