SKF 3202 A-2RS1TN9/GFJ double row angular contact ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Double row angular contact ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 3202 A-2RS1TN9/GFJ
- 32Series
- Double row angular contact ball bearings, 32 series. For the same bore, each series has a different outside diameter and width.
- 02Bore
- 15 mm bore: code 02 stands for 15 mm by standard.
- A-2RS1TN9/GFJSuffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
3202 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 3202 A-2RS1TN9/GFJ bearing has a 15 mm bore, a 35 mm outside diameter and a 15.9 mm width (15 x 35 x 15.9 mm).
SKF 3202 A-2RS1TN9/GFJ is a reference of double row angular contact ball bearing, within Bearings. Request a quote for 3202 A-2RS1TN9/GFJ via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
SKF double row angular contact bearings are components designed to support radial and axial loads in both directions. Their two-row ball construction allows superior performance in applications where high rigidity and precision are required. They are ideal for industrial equipment operating at moderate and high speeds, such as pumps, compressors and machine tools. At MR Accesorios Industriales we sell them as part of our SKF bearing line.
The designation of these bearings follows a coded system. The numeric prefix indicates the size and series. The letter A indicates an optimized internal design. The suffix 2RS1 corresponds to rubber seals on both sides, which protect against contaminants. TN9 identifies a polyamide cage reinforced with fiberglass. Finally, /GFJ specifies a high-temperature, long-life lubricant. This nomenclature allows selecting the appropriate bearing according to the operating conditions.
These bearings are used in a wide variety of industries in Argentina. They are common in centrifugal pumps, screw compressors, industrial fans and machine tools. They are also found in power transmission equipment, such as gear reducers and gearboxes. Their ability to support combined loads makes them suitable for applications where precise alignment is critical. In the food and pharmaceutical sector, the sealed versions prevent lubricant contamination.
To select the correct bearing, it is essential to consider the radial and axial load, the rotation speed and the environmental conditions. The 2RS1 sealing is suitable for environments with dust or moisture, while the TN9 cage offers good fatigue resistance. During mounting, ensure correct alignment between the shaft and the housing to avoid additional loads. The /GFJ lubrication is already built in, but verify compatibility with the existing lubricant if you are going to relubricate.
As for equivalences, double row angular contact bearings from other brands may have similar designations, but they are not necessarily interchangeable. Factors such as the contact angle, internal clearance and cage type may vary. Always consult the technical specifications before replacing one bearing with another of a different brand. At MR Accesorios Industriales we can advise you on compatibility and alternatives in our SKF catalogue.
If you need a quote for a double row angular contact bearing, send us the complete part number by WhatsApp. At MR Accesorios Industriales we reply with the technical information and the quote. We work with SKF to guarantee the quality and performance of your equipment.
Dimensions
Boundary dimensions of the basic designation 3202 per ISO 15: 15 x 35 x 15.9 mm (d x D x B).
- Bore
- 15mm
- Outside diameter (D)
- 35mm
- Width (B)
- 15.9mm
Frequently Asked Questions
- What are the dimensions of the SKF 3202 A-2RS1TN9/GFJ bearing?
- The SKF 3202 A-2RS1TN9/GFJ bearing has a 15 mm bore, a 35 mm outside diameter and a 15.9 mm width (15 x 35 x 15.9 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 3202.
- What does the suffix 2RS1 mean in these bearings?
- The suffix 2RS1 indicates that the bearing has rubber seals on both sides. These seals protect against the entry of contaminants and retain the lubricant, prolonging service life in hostile environments.
- Can I replace a bearing from another brand with an SKF one?
- They are not always directly interchangeable. Although the dimensions may match, the contact angle, internal clearance and cage may differ. Consult us to verify compatibility before replacing.
- What type of lubricant do these bearings have?
- The suffix /GFJ indicates a high-temperature, long-life lubricant, suitable for demanding applications. If you need to relubricate, verify compatibility with the original lubricant to avoid inadequate mixtures.