SKF 24192 ECA/C3W33 spherical roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 24192 ECA/C3W33
- 241Series
- Spherical roller bearings, 241 series. For the same bore, each series has a different outside diameter and width.
- 92Bore
- 460 mm bore: 92 × 5.
- ECA/C3W33Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
24192 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 24192 ECA/C3W33 bearing has a 460 mm bore, a 760 mm outside diameter and a 300 mm width (460 x 760 x 300 mm).
SKF 24192 ECA/C3W33 is a reference of spherical roller bearing, within Bearings. Request a quote for 24192 ECA/C3W33 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
SKF spherical roller bearings are self-aligning, double-row components designed to withstand high radial loads and axial loads in both directions, even with misalignment between the shaft and the housing. They are used in heavy equipment where shaft deflection or mounting errors are common. MR Accesorios Industriales carries this line, with technical support to select the right execution.
The designation of this series combines a four- or five-digit basic number with the suffixes ECA/C3W33. The basic number identifies the size and load capacity; for example, in 24088 ECA/C3W33 and 24176 ECA/C3W33 the leading digits change according to diameter and dimension series. The suffix ECA defines the internal design with a stamped steel cage and cylindrical bore; C3 indicates an internal radial clearance greater than normal, and W33 indicates the presence of a lubrication groove and holes in the outer ring. These codes let you order the exact bearing for each application.
They are used in core industries such as cement, mining, steel, paper, wind power and earthmoving equipment. In Argentina they appear in crushers, mills, conveyor belts, large centrifugal pumps, industrial fans and road machinery. Their self-aligning capability makes them suitable for long shafts or shafts subject to deflection, where other rigid bearings would fail due to stress concentration. They are also used in applications with combined loads and moderate speeds.
To select correctly, you must consider radial and axial load, rotational speed, required internal clearance and type of lubrication. The C3 suffix is chosen when the fit is tight or the operating temperature increases clearance; W33 makes relubrication through the outer ring easier. During mounting, check initial alignment, cleanliness of the seats and the heating method to avoid damage. Lubrication must be suitable for the temperature and load, and peripheral sealing prevents contamination.
As for equivalents, spherical roller bearings are manufactured under international standards for dimensions and tolerances, so different brands offer dimensionally interchangeable products. However, internal suffixes may vary between manufacturers: the same size may have different cage, clearance or lubrication designs. It is always advisable to verify the complete part number and service conditions before replacing one bearing with another brand.
If you need a quote for a bearing in this series, send the complete part number via WhatsApp to MR Accesorios Industriales. We advise you on choosing the right execution and quote you promptly.
Dimensions
Boundary dimensions of the basic designation 24192 per ISO 15: 460 x 760 x 300 mm (d x D x B).
- Bore
- 460mm
- Outside diameter (D)
- 760mm
- Width (B)
- 300mm
The same size in other brands
Pages from other brands with the basic designation 24192: 460 x 760 x 300 mm (d x D x B) per ISO 15.
- FAG24192-BEA-XL-MB124192-BEA-XL-K30-MB1
- NSK24192CAME424192CAMK30E4
- NTN24192B24192BK30
- RKB24192
- TIMKEN24192YMB
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 24192 ECA/C3W33 bearing?
- The SKF 24192 ECA/C3W33 bearing has a 460 mm bore, a 760 mm outside diameter and a 300 mm width (460 x 760 x 300 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 24192.
- What does the C3 suffix mean on these bearings?
- The C3 suffix indicates an internal radial clearance greater than normal. It is specified when the bearing operates with tight fits, temperature differences between rings or high speeds, to prevent the clearance from becoming too small during operation.
- What is the W33 groove and holes for?
- The W33 designation indicates that the outer ring has a lubrication groove and holes. This allows the bearing to be relubricated from the housing without dismounting it, which simplifies maintenance on hard-to-reach equipment.
- How do I request a quote for an SKF bearing?
- Write to us via WhatsApp with the complete bearing part number, for example 24088 ECA/C3W33, and the quantity you need. At MR Accesorios Industriales we reply with the quote and alternatives.