SKF 24013-2RS5W/C3VT143 spherical roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 24013-2RS5W/C3VT143
- 240Series
- Spherical roller bearings, 240 series. For the same bore, each series has a different outside diameter and width.
- 13Bore
- 65 mm bore: 13 × 5.
- 2RS5W/C3VT143Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
24013 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 24013-2RS5W/C3VT143 bearing has a 65 mm bore, a 100 mm outside diameter and a 35 mm width (65 x 100 x 35 mm).
SKF 24013-2RS5W/C3VT143 is a reference of spherical roller bearing, within Bearings. Request a quote for 24013-2RS5W/C3VT143 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF spherical roller bearing is a component designed to withstand high radial loads and axial loads in both directions, even when the shaft has angular misalignment. Its design with two rows of rollers and a spherical outer raceway allows the inner ring to articulate, compensating for mounting errors or shaft deflection. It is used in equipment subject to vibration, shocks or deformation, where other bearings would fail due to lack of alignment. MR Accesorios Industriales supplies this line with technical advice to select the appropriate variant.
The designation of this series combines letters and numbers that indicate design features and variants. For example, in 24013-2RS5W/C3VT143, the numeric prefix identifies the size and dimension series; the suffix 2RS5 indicates double contact sealing; W indicates a cage or internal design variant; /C3 specifies the radial internal clearance greater than standard; and VT143 corresponds to a high-temperature and high-speed grease. Knowing these codes allows you to choose the correct configuration for each application.
These bearings are used in industries such as cement, mining, steel, paper and aggregate processing. In Argentina, they are common in belt conveyors, mills, crushers, vibrating screens, industrial fans and paper machines. Their ability to withstand misalignment makes them ideal for equipment where shafts deflect under load or where supports are not perfectly aligned. They are also used in applications with high temperatures or contaminated environments, thanks to the available sealing and lubrication variants.
To select the appropriate bearing, take into account radial and axial load, rotation speed, operating temperature and contamination level. The 2RS5 sealing protects against dust and moisture, but can limit maximum speed; in clean environments and at high speeds, an open variant may be preferable. The C3 clearance is recommended when there are thermal gradients between inner and outer rings. During mounting, ensure correct initial alignment and avoid striking the rings; use appropriate mounting tools and lubricate according to specification.
SKF spherical roller bearings can be interchanged with equivalent products from other brands, as long as the main dimensions, sealing type, internal clearance and load capacity match. Not all suffixes are equivalent between manufacturers; for example, a contact seal may have different friction resistance. When replacing, verify that tolerances and lubrication are compatible with the application. MR Accesorios Industriales can advise you on the correct equivalence.
If you need an SKF spherical roller bearing, send us the complete part number by WhatsApp. At MR Accesorios Industriales we help you identify the exact variant and resolve your technical questions. Request a quote with no obligation and receive personalized attention.
Dimensions
Boundary dimensions of the basic designation 24013 per ISO 15: 65 x 100 x 35 mm (d x D x B).
- Bore
- 65mm
- Outside diameter (D)
- 100mm
- Width (B)
- 35mm
The same size in other brands
Pages from other brands with the basic designation 24013: 65 x 100 x 35 mm (d x D x B) per ISO 15.
- RKB24013
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 24013-2RS5W/C3VT143 bearing?
- The SKF 24013-2RS5W/C3VT143 bearing has a 65 mm bore, a 100 mm outside diameter and a 35 mm width (65 x 100 x 35 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 24013.
- What does the C3 suffix mean on an SKF bearing?
- The C3 suffix indicates a radial internal clearance greater than standard. It is used when the bearing operates at high temperatures or when there is interference in the mounting, to prevent the clearance from being reduced excessively and causing premature failures.
- When should I choose a bearing with 2RS5 sealing?
- The 2RS5 sealing is suitable for environments with dust, moisture or contaminants, since it protects the lubricant and prevents the entry of particles. However, it can limit maximum speed; in clean, fast applications, evaluate an open variant or one with another type of protection.
- How do I know if I can replace a bearing from another brand with an SKF one?
- You must compare main dimensions, sealing type, internal clearance and load capacity. Even if the dimensions are the same, the suffixes may indicate different features. Consult us with the original part number and we will advise you on the most suitable equivalence.