SKF 23160 CACK/W33 spherical roller bearing

SKF 23160 CACK/W33 is a reference of spherical roller bearing, within Bearings. Request a quote for 23160 CACK/W33 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

SKF CACK/W33 spherical roller bearings are two-row oscillating components designed to withstand high radial loads and axial loads in both directions. Their self-aligning design compensates for angular misalignment between shaft and housing, making them ideal for applications with shaft deflection or imprecise mounting. They are used in heavy machinery, mining, cement, steel and power transmission equipment in general.

The designation CACK/W33 is interpreted as follows: the basic series (for example, 23060, 23152, 23248) indicates the size and load capacity according to ISO standards. The suffix CA defines the one-piece machined brass cage, centered on the roller rows. The K indicates a tapered bore (taper 1:12), suitable for mounting on a tapered shaft or with an adapter sleeve. The W33 indicates that the bearing incorporates a lubrication groove and three holes in the outer ring, facilitating greasing. Thus, 23060 CACK/W33 is a bearing of series 230, with CA cage, tapered bore and W33 lubrication.

These bearings are used in applications where loads are high and misalignment may occur. In Argentina, they are common in the cement industry (mills, kilns), mining (crushers, conveyor belts), steel (rolling mills), paper (presses, dryers) and in power transmission equipment such as gearboxes and couplings. They are also found in road machinery, cranes and port equipment. Their self-aligning capability makes them suitable for long shafts that suffer deflection.

To correctly select a CACK/W33 spherical roller bearing, take into account the radial and axial load, the rotation speed and the environmental conditions. Mounting with a tapered bore requires an adapter sleeve or a tapered shaft; it is essential to verify the internal clearance after mounting, since excessive tightening can reduce the clearance and cause overheating. Lubrication must be adequate: the W33 groove and holes allow relubrication through the outer ring. Initial alignment is not critical thanks to self-alignment, but it is advisable not to exceed the permissible angular limits.

Regarding equivalences, SKF spherical roller bearings can be interchanged with those of other brands that follow the same standardized designations. For example, an SKF 23060 CACK/W33 is equivalent to a bearing with tapered bore and brass cage from another brand, as long as dimensions and tolerances match. It is important to verify the exact suffix, since variants such as CC, CA or E may indicate differences in the cage or load capacity.

If you need SKF CACK/W33 series spherical roller bearings, at MR Accesorios Industriales we advise you. Send us the complete part number via WhatsApp and we will quote you promptly. We work with the main brands to give you the best solution.