Spherical roller bearing SKF 23024 CCK/C3W33

SKF 23024 CCK/C3W33 is a spherical roller bearing reference, within Bearings. Request a quote for 23024 CCK/C3W33 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

SKF 222 series spherical roller bearings with CCK, C3 or C4 and W33 suffixes are self-aligning bearings with two rows of rollers, a tapered bore and a stamped steel cage. They are used in applications where there is misalignment between shaft and housing, significant radial loads and some axial load. MR Accesorios Industriales offers this line as an official brand for the Argentine industrial market.

The designation 22228 CCK/C3W33 reads as follows: 222 indicates the medium-section spherical roller bearing series; 28 is the size code; CCK defines the internal design with a 1:12 tapered bore and stamped steel cage; C3 or C4 indicate the internal radial clearance, greater than normal; W33 indicates that the bearing has a lubrication groove and holes in the outer ring. Examples in the series range from 22228 to 22234, with C3 or C4 and W33 combinations.

These bearings appear in mining, cement, steel, paper, aggregate processing and heavy transport equipment. They are found in conveyor belts, mills, crushers, vibrating screens, industrial fans and paper machines. In Argentina they are common in cement plants, quarries and the oilseed industry, where long shafts and welded structures require tolerating misalignment without losing load capacity.

To select correctly, take into account the radial and axial load, speed, type of fit and internal clearance. The CCK tapered bore is mounted on a tapered shaft or adapter sleeve; C3 or C4 clearance is chosen according to the operating temperature and fit. Grease or oil lubrication must cover the W33 groove and holes. Initial alignment and sealing prevent contamination and extend service life.

As for equivalences, spherical roller bearings with a tapered bore and similar suffixes are available from different brands, but internal codes and clearances do not always match. Do not replace by number without verifying dimensions, clearance and cage type. Interchangeability between manufacturers requires comparing tolerances and load capacities, not just diameter and width.

If you need to replace a bearing from this series, send us the complete code by WhatsApp at MR Accesorios Industriales. With the exact number, brand and a photo of the mounting, we can guide you on the right option within the SKF line we offer.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.