SKF 22310 E/C4 spherical roller bearing

SKF 22310 E/C4 is a reference of spherical roller bearing, within Bearings. Request a quote for 22310 E/C4 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

SKF spherical roller bearings are self-aligning double-row bearings with a spherical raceway in the outer ring and a cylindrical bore. They absorb high radial loads and axial loads in both directions, and tolerate angular misalignment between shaft and housing. They are used in equipment with shaft deflection or imprecise mounting, where a rigid bearing would not last. MR Accesorios Industriales sells this line with technical advice so you choose the right suffix.

The designation reads as follows: the numeric prefix indicates a double-row spherical roller bearing with cylindrical bore; the next two digits indicate the size. For example, 22205 is a bearing with a 25 mm bore; 22206, 30 mm; 22207, 35 mm; 22208, 40 mm; and 22209, 45 mm. The suffix E indicates an optimized design with higher load capacity. After the slash, C2, C3 or C4 indicate the radial internal clearance: C2 is tighter than standard, C3 is looser and C4 even more so. Choosing the correct clearance according to temperature and fit prevents premature failures.

These bearings appear in equipment where the shaft deflects or the mounting is not perfectly aligned: conveyor belts, vibrating screens, mills, mixers, centrifugal pumps, industrial fans and agricultural machinery. In Argentina they are found in food plants, cement plants, quarries, sugar mills and poultry facilities. Also in gearboxes and power transmissions that work with moderate shock loads. The self-aligning capability of the outer ring compensates for machining errors in the housing or shaft deflection, and extends the service life of the assembly.

To select correctly, take into account the radial and axial load, the rotation speed and the working temperature. The internal clearance should be chosen according to the shaft and housing fit: a tight fit or high temperature calls for greater clearance, such as C3 or C4. Lubrication is key: good quality grease and periodic renewal, or oil if the speed is high. During mounting, check alignment and avoid striking the rings. A poorly lubricated or misaligned spherical roller bearing loses its advantage and fails earlier.

Do not replace by part number without verifying the internal clearance and load capacity. If the original bearing has a special suffix, it is advisable to keep that characteristic. MR Accesorios Industriales can advise you on interchangeability and source the SKF reference you need.

To request a quote, send us via WhatsApp the complete part number shown on the bearing or on the drawing. With that data we verify the series, the bore and the internal clearance. If you do not have the part number, send a photo of the part and the shaft and housing dimensions. At MR Accesorios Industriales we work with SKF bearings and other lines so your equipment keeps running.