Y-bearing (insert bearing) SKF 1726211-2RS1

SKF 1726211-2RS1 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for 1726211-2RS1 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF Y-bearing is an insert bearing with a spherical outer ring and a bore that is secured to the shaft by set screws or eccentric collar, depending on the model. It is mounted inside split or pillow block housings and forms a ready-to-operate unit. Its self-aligning design absorbs small misalignments and makes it ideal for transmission, conveying and material handling equipment where mounting must be simple and maintenance quick.

The designation of these Y-bearings combines the basic number with suffixes that indicate the type of sealing. In the series 1726203-2RS1, 1726204-2RS1 and 1726205-2RS1, the numeric prefix identifies the size and design of the insert, while the suffix 2RS1 indicates double nitrile contact sealing on both sides. This sealing protects against dust, chips and splashes, and retains the built-in lubrication. The examples 1726206-2RS1 to 1726210-2RS1 follow the same logic: the higher the number, the larger the bore size and load capacity.

These Y-bearings are used in belt conveyors, bucket elevators, mixers, screens, packaging lines and agricultural equipment. In Argentina they appear frequently in food plants, cement plants, quarries and logistics warehouses, where the environment has dust or humidity and a bearing that withstands without frequent lubrication is needed. They are also common in woodworking, ceramics and aggregate processing machinery, always mounted in split or pillow block housings that MR Accesorios Industriales carries together with the bearing.

To choose correctly, verify the shaft diameter and the type of fastening: some have set screws on the inner ring or an eccentric collar. The 2RS1 sealing is suitable in dirty or washdown environments; if there is a lot of water, consider additional housing covers. When mounting, align the housing with the shaft, tighten the screws with the correct wrench and avoid striking the outer ring. Lubrication comes from the factory, but in service it is advisable to check the condition of the sealing and relubricate if the housing allows it.

Regarding interchangeability, Y-bearings are identified by their bore diameter, width and type of fastening. Different brands use their own nomenclatures, so equivalence is established by comparing those dimensions and the sealing style, not just the code. If you have the old number stamped on the bearing or housing, send it: with that, the equivalent reference can be found within the SKF line that MR carries.

If you need to replace a Y-bearing, send the complete code via WhatsApp to MR Accesorios Industriales. With the number and a photo of the housing, the reference can be confirmed and the quote prepared.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.