Product page
V-ring seal SKF 130 VS R
- Manufacturer Part Number
- 130 VS R
- Brand
- SKFOfficial brand
- Category
- Seals
- Subcategory
- V-ring seals
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF 130 VS R is a v-ring seal reference, within Seals. Request a quote for 130 VS R via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
SKF V-ring seals of the VS R series are axial elastomer seals with a V-shaped lip that mount on the shaft and seal against a perpendicular face. Their main function is to protect bearings and housings from external contaminants such as dust, water and splashes, without generating significant friction. They are ideal for applications requiring an additional, economical and easy-to-install barrier.
The designation of the VS R series is read with the nominal shaft diameter followed by the letters VS R. For example, 12 VS R corresponds to a seal for a 12 mm shaft, 20 VS R for 20 mm and 30 VS R for 30 mm. The VS R suffix identifies the lip geometry and the standard material. It does not include width dimensions or tolerances in the designation; that data is found in specific tables.
In Argentine industry, SKF V-rings are used in pumps, electric motors, gear reducers, conveyors and agricultural equipment. Their ability to work in dusty environments or with water projections makes them common in food plants, cement plants and industrial wash bays. They are also used as secondary seals in bearing housings to extend lubricant life.
To select a V-ring, verify the shaft diameter and the permissible peripheral speed. The lip must run against a machined face perpendicular to the shaft, with adequate surface roughness. Lubricating the lip with grease or oil reduces wear. Ensure alignment between the shaft and the sealing face to prevent leaks. Installation is done by hand pressure or with a suitable tool, without damaging the elastomer.
SKF V-rings are interchangeable with seals from other brands that follow the same dimensional standard. When replacing, compare the shaft diameter, lip profile and material. In general, a V-ring of the same size from another brand may work, but verify chemical and thermal compatibility. MR Accesorios Industriales carries SKF as an official brand.
If you need V-ring seals for your equipment, send the complete code via WhatsApp to MR Accesorios Industriales. We quote the exact size and advise you on installation. More than 80 years back us as an industrial supplier in Argentina.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the VS R designation mean in SKF seals?
- VS R identifies the SKF V-ring seal series. The preceding number indicates the nominal shaft diameter in millimeters. For example, 20 VS R is for a 20 mm shaft. It is a standard nomenclature for selecting the correct size.
- How is a V-ring seal installed?
- It is mounted on the shaft, with the lip in contact with a perpendicular face. It is recommended to lubricate the lip and verify alignment. Installation is manual, pressing until it seats. Avoid striking the elastomer to prevent damage.
- Does MR Accesorios Industriales sell SKF V-ring seals?
- Yes, we carry SKF V-ring seals as an official brand. To request a quote, send the code via WhatsApp. We respond with technical advice. More than 80 years of experience back us.