SEALMASTER VE-239 insert bearing

SEALMASTER VE-239 is a reference of insert bearing, within Bearings. Request a quote for VE-239 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SEALMASTER VE series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split or pillow block housings to form a mounted bearing unit. It is used in equipment where a rotating shaft must be supported with simple alignment and accessible maintenance, such as conveyors, fans, mixers and plant machinery. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, in bearings and power transmission.

The VE series designation is read with the prefix VE followed by a three-digit number. In the examples VE-108, VE-110, VE-112, VE-114, VE-115, VE-116, VE-118 and VE-119, that number identifies the bore size and the outside diameter of the insert within the family. The VE 100 series and the VE 200 series share the concept of an insert with an extended inner ring, but they differ in dimensions and in the housing they are combined with. To choose correctly, send the complete part number: that identifies the size and the variant.

These inserts are used in equipment with shafts that rotate at moderate speeds and normal loads. They appear in belt and chain conveyors, centrifugal fans, mixers, mills, screens, bucket elevators and packaging lines. In Argentina they are found in food plants, cement plants, ceramics plants, meat processing plants and aggregate treatment facilities. The advantage of the insert is that it allows the bearing to be replaced without changing the entire housing, which is practical when the equipment is mounted on a fixed structure and access is limited.

To select the correct insert, take into account the shaft diameter, the housing type and the sealing required by the environment. In applications with dust, water or frequent washing, a tighter seal is advisable; in dry, clean environments, a standard seal is enough. During mounting, check that the shaft has no burrs, lubricate the seating surface and tighten the housing screws evenly so as not to deform the outer ring. Alignment between housings is key so that the insert works without lateral stresses.

Insert bearings are interchanged between brands by size and locking type, not by the commercial part number. If the equipment carries a SEALMASTER VE, it is most likely that an equivalent reference exists in another brand with the same bore and outside dimensions. To find the equivalent, it is advisable to compare the shaft diameter, the insert outside diameter and the shaft locking system. MR Accesorios Industriales will tell you the compatible alternative if you send that data or the original part number.

If you need a SEALMASTER VE series insert, send the part number by WhatsApp to MR Accesorios Industriales. With the part number shown on your equipment, we will quote the reference and, if applicable, the equivalent option. We also manufacture split housings and custom parts, so if the mounting requires an adaptation, we can solve it.