Insert bearing SEALMASTER VE-135

SEALMASTER VE-135 is a insert bearing reference, within Bearings. Request a quote for VE-135 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SEALMASTER VE series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split or pillow block housings to form a mounted bearing unit. It is used in equipment where a rotating shaft needs to be supported with simple alignment and accessible maintenance, such as conveyors, fans, mixers and plant machinery. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with more than 80 years of experience in bearings and power transmission.

The VE series designation is read with the prefix VE followed by a three-digit number. In the examples VE-108, VE-110, VE-112, VE-114, VE-115, VE-116, VE-118 and VE-119, that number identifies the bore size and the outside diameter of the insert within the family. The VE 100 series and the VE 200 series share the concept of an insert with an extended inner ring, but they differ in dimensions and in the housing they are combined with. To choose correctly, send the complete part number: that identifies the size and the variant.

These inserts are used in equipment with shafts rotating at moderate speeds and normal loads. They appear in belt and chain conveyors, centrifugal fans, mixers, mills, screens, bucket elevators and packaging lines. In Argentina they are found in food plants, cement plants, ceramics plants, meat processing plants and aggregate treatment facilities. The advantage of the insert is that it allows the bearing to be replaced without changing the entire housing, which is practical when the equipment is mounted on a fixed structure and access is limited.

To select the correct insert, take into account the shaft diameter, the housing type and the sealing required by the environment. In applications with dust, water or frequent washing, a more closed seal is advisable; in dry, clean environments, a standard seal is sufficient. During mounting, check that the shaft has no burrs, lubricate the seating surface and tighten the housing screws evenly so as not to deform the outer ring. Alignment between housings is key for the insert to work without lateral stresses.

Insert bearings are interchanged between brands by size and locking type, not by the commercial part number. If the equipment has a SEALMASTER VE, it is most likely that an equivalent reference exists in another brand with the same bore and outside dimensions. To find the equivalent, it is advisable to compare the shaft diameter, the insert outside diameter and the shaft locking system. MR Accesorios Industriales will indicate the compatible alternative if you send that data or the original part number.

If you need a SEALMASTER VE series insert, send the part number by WhatsApp to MR Accesorios Industriales. With VE-108, VE-110 or whichever appears on your equipment, we will quote the reference and, if applicable, the equivalent option. We also manufacture split housings and custom parts, so if the mounting requires an adaptation, we can solve it.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.