Flange bearing 4 holes SEALMASTER USFBE5000A-211

SEALMASTER USFBE5000A-211 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for USFBE5000A-211 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

SEALMASTER housings of the USFBE5000A series are four-bolt flange mounted units, designed to support rotating shafts in equipment where mounting is done on a flat face. The flange allows the housing to be secured with four bolts and the shaft to be centered without machining the bedplate. They are used in conveyors, agitators, pumps and fans, among other industrial applications. MR Accesorios Industriales sells them in Buenos Aires, Argentina.

The USFBE5000A series designation is read in blocks: the letters USFBE identify the four-bolt flange mounted housing family; the number 5000 corresponds to the construction size; the final letter A indicates a design variant within the same series. The examples USFBE5000A-115, USFBE5000A-200, USFBE5000A-203, USFBE5000A-207, USFBE5000A-208, USFBE5000A-211, USFBE5000A-212 and USFBE5000A-215 show the numeric suffix that defines the shaft diameter for which the bore of the inner bearing is machined. That suffix is the data you need to provide to quote the correct unit.

These housings are chosen in food and beverage plants, water treatment, cement, mining and material handling. In Argentina they appear in belt and chain conveyors, mixers, blowers, centrifugal pumps and packaging equipment. The four-bolt flange simplifies mounting on folded sheet metal or cast iron structures, and allows the shaft to be aligned with simple adjustments. They are also used in agricultural machinery and in production lines where a complete unit needs to be replaced without disassembling the equipment.

To select the housing, start from the shaft diameter and the type of load: radial, axial or combined. Verify that the flange has a bolt hole spacing compatible with the existing structure. During mounting, seat the flange on a clean, flat surface, tighten the four bolts in a cross pattern and check shaft alignment with a dial indicator. Lubrication and sealing of the inner bearing are key: choose the appropriate sealing according to the environment (dust, water or frequent washdowns) and relubricate according to the duty cycle. If the equipment vibrates, check the tightening and concentricity.

Mounted housings are interchanged between brands by part number and by flange dimensions, shaft diameter and inner bearing type. There is no universal equivalence: each manufacturer uses its own nomenclature. To replace a SEALMASTER USFBE5000A with another brand, compare the critical dimensions —shaft diameter, bolt hole spacing, center height and locking type— and consult a specialist. MR Accesorios Industriales will indicate the compatible alternative if you send the complete part number and the dimensions of the original housing.

If you need to replace a SEALMASTER USFBE5000A housing, send the complete part number by WhatsApp to MR Accesorios Industriales. With that data we will quote the unit and, if you are looking for a variant that does not appear in the list, write to us with the model or dimensions and we will give you an answer shortly. We serve distributors and end users throughout the country from Buenos Aires, Argentina.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.