Flange bearing 4 holes SEALMASTER USFBE5000-307

SEALMASTER USFBE5000-307 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for USFBE5000-307 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

SEALMASTER USFBE5000 series are 4-bolt flange mounted bearings: the unit combines the bearing with its housing in a single piece, with a flat mounting face and the fastening holes at the four corners. They are used to support rotating shafts on sheet metal or cast structures, where firm fastening and simple alignment are required. MR Accesorios Industriales supplies them in Buenos Aires, Argentina.

The series designation is read in blocks. The letters USFBE identify the flange housing family with mounted bearing, and the number that follows, 5000, corresponds to the unit series. In the examples in this line, the numeric suffix that appears after the hyphen —as in USFBE5000-115 or USFBE5000-208— distinguishes each shaft size within the same series. That is why, when ordering a unit, the complete code with that suffix is the data that defines the size.

These housings are seen in belt and roller conveyors, packaging lines, mixers, blowers, bucket elevators and process equipment. In food and beverage, chemical, cement and aggregate processing plants in Argentina, the 4-bolt flange allows mounting on folded sheet metal frames or on machine housings, with the shaft passing through and the unit bolted from the front. They are also chosen in equipment where the pillow block housing does not fit due to lack of space.

To select correctly, start from the shaft diameter you need and the type of load: the 4-bolt flange works well with radial loads and moderate axial loads. Check the sealing according to the environment: dust, water or frequent washdown require tighter protection. During mounting, seat the flange on a clean, flat surface, tighten the four bolts evenly and verify shaft alignment before start-up. Lubrication is defined by the duty cycle and temperature.

Among brands, flange mounted units are interchanged by shaft number and by the flange dimensions: hole diameter, center distance and mounting face height. It is not enough for the commercial series to match. If the equipment carries a unit from another brand, send us the code stamped on the housing or the flange dimensions and we will point you to the compatible SEALMASTER alternative.

If you already have the unit code, send it by WhatsApp to MR Accesorios Industriales and we will quote it promptly. If you are looking for a variant you do not see among these sizes, write to us with the model or the shaft and flange dimensions: we will point you to the option that corresponds.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.