SEALMASTER USBFF5000A-207 flange mounted bearing

SEALMASTER USBFF5000A-207 is a reference of flange mounted bearing, within Bearing housings. Request a quote for USBFF5000A-207 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SEALMASTER USBFF5000A series flange housing is a cast housing that mounts on a flat surface and holds an insert bearing with locking. It is used when the shaft must be perpendicular to the mounting surface and a rigid fastening with four anchor points is required. It is a common solution in transmission, conveying and process equipment where the mounting must be compact and weather-resistant.

The USBFF5000A designation is read in blocks: USBFF identifies the flange housing type with insert bearing, and 5000A corresponds to the housing series. The number after the hyphen, as in USBFF5000A-207, indicates the shaft diameter for which the insert is formed. That final figure defines the shaft size and must match the bearing to be mounted. To get a quote, provide the complete part number as shown on the equipment.

In Argentine industry these housings appear in belt and roller conveyors, mixers, exhausters, centrifugal pumps, blowers and packaging lines. They are also found in water treatment equipment, food plants and ventilation systems. The flange allows mounting on sheet metal or steel structure with four bolts, which simplifies replacement and alignment in equipment where side access is limited.

To select the housing, verify that the shaft diameter matches the insert part number and that the flange has the correct hole pattern for your mounting. The insert sealing defines the degree of protection: for dusty or wet environments, a version with an additional seal is preferable. During mounting, seat the flange on a clean, flat surface, tighten the bolts in a cross pattern and check that the shaft turns without effort. The insert is lubricated through the grease channel, with the grease specified by the equipment manufacturer.

Flange housings with insert bearings from different brands share dimensional criteria, but they are not always interchangeable with each other. Differences are usually in the housing height, the mounting hole diameter and the insert locking system. If you need to replace an existing housing, the safest approach is to compare the complete designation and the main dimensions. At MR Accesorios Industriales we indicate the alternative compatible with your part number.

To proceed with the quote, send us the complete housing part number on WhatsApp, for example USBFF5000A-207, and a photo of the flange if you have one at hand. With that data we will send you a quote shortly and tell you whether any associated component is needed, such as the insert or the seal. MR Accesorios Industriales sells SEALMASTER and other bearing housing lines for all Argentine industry.