SEALMASTER USBF5000A-107 flange mounted bearing

SEALMASTER USBF5000A-107 is a reference of flange mounted bearing, within Bearing housings. Request a quote for USBF5000A-107 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SEALMASTER USBF5000A series housing is a flange mounted unit: the housing and the bearing come assembled as a set ready to be fixed onto the face of a machine or structure. It is used where the load must be transmitted to the frame with four anchoring points and the shaft must be kept supported with self-alignment, in continuous process equipment. MR Accesorios Industriales sells it in Buenos Aires, Argentina.

The USBF5000A series designation is read in blocks: the letters identify the type of flange mounted unit and the shape of the housing, and the numeric block 5000A defines the housing series and the bearing locking system. The examples we handle, USBF5000A-107 and USBF5000A-115, show the final suffix that distinguishes the shaft size for which each unit is assembled. That is why, when requesting a reference, the complete code with that suffix is the data that defines the product.

These housings appear in belt and screw conveyors, bucket elevators, mixers, blowers and packaging lines, typical of the food, chemical, cement and aggregate processing industries in Argentina. The four-hole flange allows them to be mounted on folded sheet metal or machined plates, with the shaft perpendicular to the mounting plane. It is a common solution when access to align two separate housings is limited and a self-centering unit is sought.

To select the unit, start from the shaft size required by the equipment and the flange diameter that the structure accepts. Check the sealing type according to the environment: a section with abrasive dust is not the same as one with frequent washing. During mounting, rest the flange on a flat, clean surface, tighten the four bolts in a cross pattern and verify that the shaft turns without effort before connecting the transmission. Lubrication and internal clearance are controlled according to the equipment's duty cycle.

Regarding interchangeability, flange mounted units are compared between brands by shaft size, flange diameter and hole spacing, and the type of inner ring locking. Two references from different manufacturers may share mounting dimensions without being identical in sealing or load capacity, so it is advisable to compare the drawings before replacing. The compatible alternative with those dimensions is sought.

If you have the code of the unit you are replacing, send it by WhatsApp to MR Accesorios Industriales along with a photo of the flange and the shaft size. With that we will quote the SEALMASTER reference or indicate the compatible alternative that solves the mounting. We also manufacture split plummer block housings and custom parts, so if the application requires a special configuration, we develop it.