Product page
Flange bearing 3 holes SEALMASTER SSF3TS-120S
- Manufacturer Part Number
- SSF3TS-120S
- Brand
- SEALMASTERBrand we market
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SSF3TS 100
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SEALMASTER SSF3TS-120S is a flange bearing 3 holes reference, within Bearing housings. Request a quote for SSF3TS-120S via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SSF3TS housing with insert bearing is a 3-bolt flange mounted bearing: the unit comes pre-assembled with the insert secured to the housing, ready to bolt onto a flat surface. It is used when a rotating shaft must be supported at a fixed point on the machine and the load transmitted to the frame without machining a housing. MR Accesorios Industriales sells this SEALMASTER line in Buenos Aires, Argentina.
The designation is read in blocks. The initial letters identify the flange housing family and the housing type; the number following the letters indicates the nominal insert size, and the final suffixes describe sealing, insert locking or housing configuration variants. In the SSF3TS 100 series, for example, SSF3TS-120S is a 3-bolt flange unit with the insert corresponding to that size. To choose correctly, send the complete code: each suffix changes the behavior of the unit.
These housings appear in belt and roller conveyors, bucket elevators, mixers, screens, packaging lines and aggregate processing equipment. In Argentine plants they are seen in food, cement, feedlots and balanced feed plants, and in any equipment where the shaft must be supported on a sheet or frame with three anchoring points. The triangular flange distributes the load and allows mounting on light structures without machining.
To select, take into account the shaft diameter, the radial and axial load it will support, and the sealing type required by the environment: a clean bay is not the same as an area with dust, water or pressure washing. Also check the alignment of the mounting surface and the internal clearance of the insert. During mounting, tighten the insert locking screws in the correct order and check that the shaft turns freely before starting the machine.
Flange mounted bearings are interchanged between manufacturers by part number and insert dimensions: shaft diameter, distance between holes and flange diameter are the data that define equivalence. If the original code is not available, those three dimensions are used to find the compatible unit from another brand. Send the code or the housing dimensions via WhatsApp to MR Accesorios Industriales and we will quote the unit or the corresponding alternative.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
- Eje o agujero
- 1 1/4 in
Frequently Asked Questions
- What does the code SSF3TS-120S mean?
- The letters identify the 3-bolt flange housing type and the number following the hyphen, the insert size. The final suffix indicates the sealing or locking variant. Send the complete code via WhatsApp and we will indicate the corresponding unit.
- How do I choose between a flange housing and a pillow block?
- The flange housing is bolted onto a flat surface and distributes the load over several points; the pillow block rests on a base and is usually used when the shaft is parallel to the floor. It depends on how the frame is built and the direction of the load.
- What data do I need to request a compatible alternative?
- Shaft diameter, distance between the flange holes and outer diameter of the housing. With those dimensions we will indicate the equivalent unit from another brand. If you have the original code, send it directly and we will cross-reference it.