Flange bearing 3 holes SEALMASTER SSF3S-120S

SEALMASTER SSF3S-120S is a flange bearing 3 holes reference, within Bearing housings. Request a quote for SSF3S-120S via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SSF3S housing with insert bearing is a 3-bolt flange mounted bearing: the housing is fastened with three bolts to a flat face and the insert rotates on the shaft, with the load line centered with respect to the flange. It is used where a shaft needs to be supported with little radial space and a distributed fastening, such as conveyors, agitators and process equipment. MR Accesorios Industriales supplies this SEALMASTER line in Buenos Aires, Argentina.

The SSF3S series designation is read in blocks: the letters identify the housing type and its flange configuration, the number that follows indicates the nominal insert size and the final letters indicate sealing or locking variants. In the SSF3S 100 series, for example, the reference SSF3S-120S corresponds to a size within that family. To choose correctly, send us the complete part number: with that we locate the exact variant and its compatible alternative.

These housings appear in belt and chain conveyors, mixers, blowers, centrifugal pumps, industrial washers and packaging lines. In food and beverage plants, chemical plants and cold storage facilities in Argentina they are chosen for the 3-bolt flange, which allows mounting on sheet metal or on a machined face with limited access. They are also used in water treatment equipment and in agricultural machinery, where a wet or dusty environment requires a well-sealed insert.

When selecting, check the shaft diameter and the flange hole, the center distance between the three bolts and the position of the load line. Check the insert sealing type: in environments with water or particles, a contact lip in good condition is advisable. During mounting, rest the flange on a clean, flat surface, tighten the three bolts in a cross pattern and align the shaft before applying final torque. Lubricate the insert according to the duty cycle and check the axial play.

As for equivalents, flange mounted bearings are interchanged between manufacturers by configuration, shaft diameter and hole spacing, not by part number. A 3-bolt housing from another brand can replace the SSF3S if those dimensions and the insert locking type match. If you need to replace a SEALMASTER reference, send us the old part number and the shaft and flange dimensions: we will indicate the compatible alternative.

MR Accesorios Industriales supplies the SEALMASTER line and manufactures split plummer block housings, ANSI chains and pulleys (sheaves). If you are looking for a variant of the SSF3S series that you do not see, write to us on WhatsApp with the part number or model you need: we will quote it shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.