SEALMASTER SSF2S-116 flange bearing 2 holes

SEALMASTER SSF2S-116 is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for SSF2S-116 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 2-bolt flange Y-bearing unit with insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, already aligned and lubricated at the factory. It is fastened with two bolts onto a flat surface and supports the shaft in applications where the load is mainly radial. The SSF2S 100 series from SEALMASTER, a brand MR Accesorios Industriales sells, covers different shaft sizes within the same mounting family.

The SSF2S series designation is read in blocks: the initial letters identify the housing type and its flange configuration, and the three-digit number that follows indicates the shaft size for which the insert is machined. To request a quote, the full part number is the key piece of data: with it we identify the exact variant.

In Argentine industry these housings appear in belt and roller conveyors, packaging lines, mixers, blowers, exhaust fans, bucket elevators and milling lines. They are also used in washing equipment, cold tunnels and water treatment plants, where the flange mounting allows the unit to be fastened to sheet metal or a frame without machining a housing bore. They are common in maintenance at food, chemical and aggregate plants, because the insert is easy to replace.

To select correctly, you have to look at the shaft diameter, the type of load and the environment. In dusty or wet areas, an insert with reinforced sealing is advisable; in applications with misalignment, a self-aligning insert that accommodates the shaft inside the housing. Mounting requires resting the flange on a clean, flat surface, tightening the two bolts evenly and checking that the shaft turns freely. Lubrication and internal clearance are checked according to the insert; if in doubt, it is worth asking by part number.

Across brands, 2-bolt flange housings with insert are interchanged by shaft size and mounting configuration, not by part number. Each manufacturer uses its own nomenclature, so the equivalence is resolved by comparing shaft diameter, distance between holes, fastening type and sealing. The compatible alternative is sought within the same family. MR Accesorios Industriales will tell you that equivalence based on the part number or model you need.

MR Accesorios Industriales sells SEALMASTER and other lines of housings and insert bearings, and manufactures split plummer block housings, ANSI chains and pulleys. If you have the part number or the equipment model, send it on WhatsApp: we will quote the corresponding variant and point you to the compatible alternative if needed. We also advise on mounting, sealing and lubrication so the unit runs aligned and lasts as long as it should.