Flange bearing 2 holes SEALMASTER SSF2S-110

SEALMASTER SSF2S-110 is a flange bearing 2 holes reference, within Bearing housings. Request a quote for SSF2S-110 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 2-bolt flange Y-bearing with insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, already aligned and lubricated at the factory. It is fastened with two bolts onto a flat surface and supports the shaft in applications where the load is mainly radial. The SSF2S 100 series from SEALMASTER, a brand supplied by MR Accesorios Industriales, covers different shaft sizes within the same mounting family.

The SSF2S 100 series designation is read in blocks: the initial letters identify the housing type and its flange configuration, and the three-digit number that follows indicates the shaft size for which the insert is machined. The examples SSF2S-108, SSF2S-110, SSF2S-112, SSF2S-114, SSF2S-115, SSF2S-116, SSF2S-118 and SSF2S-119 show how that numeric suffix changes within the same series. To request a quote, the complete part number is the key data: with it we identify the exact variant.

In Argentine industry these housings appear in belt and roller conveyors, packaging lines, mixers, blowers, exhausters, bucket elevators and milling lines. They are also used in washing equipment, cold tunnels and water treatment plants, where flange mounting allows the unit to be fastened against a sheet or frame without machining a housing. They are common in maintenance at food, chemical and aggregate plants, due to the ease of replacing the insert.

To select correctly, you must look at the shaft diameter, the load type and the environment. In areas with dust or water, an insert with reinforced sealing is advisable; in applications with misalignment, a self-aligning insert that accommodates the shaft inside the housing. Mounting requires resting the flange on a clean, flat surface, tightening the two bolts evenly and verifying that the shaft turns freely. Lubrication and internal clearance are controlled according to the insert; if in doubt, it is advisable to consult by part number.

Between brands, 2-bolt flange housings with insert are interchanged by shaft size and mounting configuration, not by part number. Each manufacturer uses its own nomenclature, so equivalence is resolved by comparing shaft diameter, distance between holes, fastening type and sealing. If the original housing is not available, the compatible alternative within the same family is sought. MR Accesorios Industriales will indicate that equivalence based on the part number or model you need.

MR Accesorios Industriales supplies SEALMASTER and other lines of housings and insert bearings, and manufactures split plummer block housings, ANSI roller chains and pulleys (sheaves). If you have the SSF2S part number or the equipment model, send it via WhatsApp: we will quote the corresponding variant and indicate the compatible alternative if needed. We also advise on mounting, sealing and lubrication so that the unit runs aligned and lasts as long as it should.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.