SEALMASTER SRF-8 flange bearing 2 holes
- Brand
- SEALMASTER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SRF
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SEALMASTER SRF-8 is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for SRF-8 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SEALMASTER SRF series Y-bearing with insert bearing is a 2-bolt flange mounted bearing: the unit combines an insert with spherical outer ring and a flange housing that is fixed with two bolts. It is used to support drive shafts where a compact, self-aligning frontal mounting is required, typical of conveying, agitation and continuous process equipment.
The SRF series designation is read by its final number: SRF-8, SRF-10, SRF-12, SRF-14, SRF-15, SRF-16, SRF-18 and SRF-19 identify each flange and insert size within the family. The prefix SRF indicates the 2-bolt flange housing type; the number that accompanies it orders the sizes from smallest to largest. To request the replacement, simply send that complete code via WhatsApp.
These housings appear in belt and chain conveyors, mixers, pumps, fans, screens and packaging lines. In food, chemical and water treatment plants they are chosen for the ease of cleaning and replacing the insert. In Argentine agriculture and metallurgical industry they are seen in screw conveyors, grain elevators and process equipment that run several hours a day.
To select correctly, consider the radial and axial load of the shaft, the rotation speed and the environment: dust, humidity or frequent washing require a tighter seal. The spherical insert allows correcting small misalignments during mounting. Fix the flange on a flat, rigid surface, tighten the bolts evenly and lubricate the insert according to the duty cycle. Check the play and the condition of the seal at each maintenance stop.
2-bolt flange units are interchangeable between brands by size number and shaft diameter, not by the commercial code. When requesting a quote, it is advisable to provide the housing code, the shaft diameter and a photo of the mounting. MR Accesorios Industriales will indicate the compatible alternative within the lines it supplies.
If you need to replace an SRF-8, SRF-12 or SRF-19, or any other size in the series, send the code and shaft dimensions via WhatsApp. At MR Accesorios Industriales we will quote the housing and indicate the alternative that best suits your equipment, with a prompt response.
Dimensions
- Bore
- 1/2 in
Frequently Asked Questions
- What does the SRF acronym mean in these housings?
- SRF identifies the SEALMASTER line of 2-bolt flange mounted bearings. The number that follows, such as SRF-8 or SRF-16, orders the housing and insert size. Send us the complete code and we will quote the unit.
- How do I choose the SRF housing for my shaft?
- You need the shaft diameter, the load it supports, the speed and the type of environment. With that data we define the sealing and the size. Send them via WhatsApp along with the code of the old housing and we will indicate the compatible option.
- Can it be replaced by another brand?
- Yes. 2-bolt flange units are interchangeable by shaft size and housing type, not by the commercial code. Send the code, the shaft diameter and a photo of the mounting and we will indicate the alternative we supply.