Insert bearing SEALMASTER SLS-116

SEALMASTER SLS-116 is a insert bearing reference, within Bearings. Request a quote for SLS-116 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SEALMASTER SLS 100 series insert bearing is a single-row bearing with an extended inner ring, designed to be mounted in split plummer block housings and mounted units. It is used when a rotating shaft needs to be supported with simple alignment and axial fixing by set screws or collar. It is a common replacement part in power transmission, conveying and process equipment, and is selected by shaft diameter and the type of housing where it is seated.

The SLS 100 series designation is read from the number that follows the hyphen: it identifies the shaft diameter for which the insert is made. In the examples SLS-108, SLS-110, SLS-112, SLS-114, SLS-115, SLS-116, SLS-118 and SLS-119, each code corresponds to a different shaft size within the same family. The SLS prefix indicates the type of insert and the numeric suffix the size; therefore, when ordering a replacement, the complete code is the key data.

These inserts appear in belt and roller conveyors, mixers, mills, bucket elevators, industrial washers and process equipment in food, chemical and aggregate plants. In Argentina they are found in packaging lines, plant conveyor belts and agricultural machinery. Since the housing that seats them is usually bolted to the structure, the insert is the part that is replaced when play, noise or lubricant loss appears.

To select the insert, start from the shaft diameter and the housing where it is mounted: the housing must be compatible with the SLS 100 series. Check the condition of the sealing, because the seal is what retains the lubricant and stops the ingress of dust and water. During assembly, seat the insert without striking the outer ring, tighten the set screws onto the shaft and verify the alignment of the housing before starting up. Proper lubrication and correct alignment extend the life of the assembly.

As for equivalences, insert bearings are compared between brands by shaft size, type of fixing and sealing configuration, not by the commercial code. An insert from another brand with the same size and fixing may be interchangeable, but it is advisable to verify the width of the inner ring and the type of seal. If the equipment has a housing from another line, MR Accesorios Industriales tells you the alternative compatible with the code on the part.

If you need to replace an SLS 100 insert, send by WhatsApp the complete code on the bearing or the shaft diameter and the type of housing. At MR Accesorios Industriales we quote it and, if you are looking for a variant that does not appear in the list, write to us with the model and we will tell you the corresponding option. More than 80 years supporting Argentine industry from Buenos Aires.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.