Product page
Flange bearing 2 holes SEALMASTER SFTMH-16
- Manufacturer Part Number
- SFTMH-16
- Brand
- SEALMASTERBrand we market
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SFTMH
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SEALMASTER SFTMH-16 is a flange bearing 2 holes reference, within Bearing housings. Request a quote for SFTMH-16 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SFTMH housing is a two-bolt flange mounted bearing: the unit combines a bearing insert with a flange housing fastened with two bolts. It is used to support rotating shafts in equipment where mounting is on a flat face, with the shaft perpendicular to that surface. MR Accesorios Industriales carries this SEALMASTER line in Buenos Aires, Argentina.
The SFTMH designation is read as a flange housing series: the letters identify the family and the number that follows indicates the insert size, not a measurement in millimeters. That is why SFTMH-16, SFTMH-19 or SFTMH-20 are not shaft diameters, but size codes within the same series. When requesting a variant, the complete part number is the data that defines the unit.
These housings appear in conveyors, belts, elevators, mixers, fans and process lines. In food, beverage, logistics and aggregate processing plants they are chosen for the ease of mounting on sheet metal or structure and for the possibility of aligning the shaft at the time of installation. The two-bolt flange allows them to be fastened in spaces where a pillow block does not fit.
To select the correct housing, start from the shaft diameter required by the application and the load type: radial, axial or combined. During mounting, the flange must rest evenly on the surface and the bolts must be tightened uniformly so as not to deform the housing. Lubrication and sealing of the insert determine service life in environments with dust, humidity or frequent washdowns.
SEALMASTER is a line of mounted bearings that MR Accesorios Industriales carries. Between brands, a two-bolt flange housing with insert is interchanged by part number and by mounting dimensions: shaft diameter, distance between holes and housing height. Those measurements are what must be compared before replacing one unit with another.
If you have the housing part number or the shaft diameter of the equipment, send it on WhatsApp to MR Accesorios Industriales and we will quote it. We can also indicate the compatible alternative within the SEALMASTER line or other brands we carry. With the part number or model you need, we move forward shortly.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the number in an SFTMH housing mean?
- The final number identifies the insert size within the SFTMH series. It is not a measurement in millimeters or a shaft diameter. To choose the correct unit, that part number must be cross-referenced with the shaft diameter and the mounting dimensions of the equipment.
- How do I know if an SFTMH housing replaces the one I have mounted?
- Compare the shaft diameter, the distance between the flange holes and the housing height. If those measurements match, the unit is interchangeable. Send us the old part number on WhatsApp and we will indicate the equivalence.
- What should I take into account for mounting?
- The flange must rest flat and the bolts must be tightened evenly so as not to deform the housing. Check shaft alignment and the condition of the sealing. In dusty or humid environments, lubrication and the type of seal determine service life.