SEALMASTER SFT-32RT flange bearing 2 holes

SEALMASTER SFT-32RT is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for SFT-32RT via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SFT-T housing with insert bearing is a 2-bolt flange mounted bearing, designed to secure rotating shafts to a flat surface and align them with the rest of the mechanism. It is used in equipment where the shaft runs parallel to the mounting plane and a compact, low-profile fastening with good rigidity is preferable. The 2-bolt flange allows it to be bolted directly onto sheet metal, machine beds or gearboxes, and the insert incorporates the sealing needed to work in environments with dust or moderate moisture.

The SFT-T series designation is read in parts: SFT identifies the 2-bolt flange housing with insert bearing, the T corresponds to the series variant, and the number that follows —as in SFT-20RT or SFT-32RT— indicates the insert size, which defines the shaft diameter it accepts. The RT suffix indicates the insert configuration and its sealing. With those data the housing is chosen without ambiguity: the complete part number already includes the size and the mounting variant.

These housings appear in belt and roller conveyors, packaging lines, elevators, mixers, blowers and continuous process lines. In Argentina they are seen in food plants, meat processing plants, water treatment plants, mills and facilities that wash with pressure or work with steam. The 2-bolt flange simplifies mounting on folded sheet metal structures and allows the shaft to be removed without moving the entire assembly. It is a common solution where space is limited and firm fastening is sought.

To select correctly, take into account the insert shaft diameter, the type of load —radial, axial or combined— and the environmental conditions. The insert seal defines whether the housing withstands dust, water or frequent washdowns; in humid environments, adequate lubrication and periodic relubrication are advisable. When mounting, rest the flange on a clean, flat surface, tighten the bolts in a cross pattern and verify the alignment of the shaft with the rest of the system. Poor alignment shortens the life of the insert bearing.

As for equivalents, 2-bolt flange housings with insert bearing are interchanged between brands by shaft number and flange configuration, but the holes, thickness and sealing type do not always match. That is why it is advisable to compare the complete part number and the critical dimensions before replacing. At MR Accesorios Industriales we will tell you the compatible alternative with the same mounting dimensions.

To request a quote for your SFT-T housing with insert bearing, send us on WhatsApp the part number shown on the equipment —for example SFT-20RT or SFT-32RT— or the shaft diameter and the bolt hole spacing of the flange. With those data we will send you the quote promptly. MR Accesorios Industriales sells SEALMASTER and other lines of housings and mounted bearings so that you find the part you need.