Flange bearing 2 holes SEALMASTER SFT-31T

SEALMASTER SFT-31T is a flange bearing 2 holes reference, within Bearing housings. Request a quote for SFT-31T via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SFT-T bracket is a 2-bolt flange mounted bearing: a unit that combines an insert bearing with a flange housing, ready to bolt onto a flat surface. It is used to guide rotating shafts in equipment where the mounting must be compact and the shaft sits perpendicular to the mounting surface. MR Accesorios Industriales supplies this SEALMASTER line in Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The SFT-T designation is read in parts: SFT identifies the family of 2-bolt flange brackets, and the final T indicates the housing and sealing variant. The numbers between the two letters, as in SFT-12T or SFT-20T, correspond to different shaft sizes within the series. So a higher code does not by itself mean a higher load: each size has its own capacity. To choose correctly, send us the full code shown on the nameplate or on the equipment drawing.

These brackets are found in belt conveyors, bucket elevators, mixers, blowers and packaging lines. In food, chemical and aggregate processing plants, the 2-bolt flange allows the bearing to be mounted on folded sheet metal or profile structures, with the shaft exiting to one side. They are also used in industrial fans and agricultural machinery, where the environment often has dust and moisture. The flange housing makes replacement easier without disassembling the whole assembly.

To select the bracket, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert's sealing defines how much contamination it tolerates: in dusty or wet environments, a tighter protection is advisable. Lubrication must be the one specified for the insert and renewed according to the duty cycle. During mounting, check that the mounting surface is clean and flat, and that the flange bolts are properly tightened and aligned with the shaft to avoid parasitic stresses.

Flange brackets with insert bearing are available from several brands under their own nomenclatures. Equivalences are established by shaft dimensions, hole spacing and flange height, not by the commercial code. So if the original code is not available, the most practical approach is to compare those dimensions with the old part or with the drawing. MR Accesorios Industriales tells you the compatible alternative within the lines it supplies, so you don't have to guess.

If you need to replace an SFT-T bracket, send us on WhatsApp the code shown on the part or in the equipment manual. With that data, at MR Accesorios Industriales we quote the exact reference or the equivalent option. We can also advise you on mounting and lubrication so the bearing works under suitable conditions. Write to us and we'll reply shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.