Flange bearing 2 holes SEALMASTER SFT-210TMC

SEALMASTER SFT-210TMC is a flange bearing 2 holes reference, within Bearing housings. Request a quote for SFT-210TMC via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SEALMASTER SFT-T series 2-bolt flange Y-bearing is a mounted unit that combines a cast housing with an insert bearing, ready to be fastened to a flat surface with two bolts. It is used to guide rotating shafts in equipment where the mounting must sit flush and centered, with simple alignment and accessible maintenance. MR Accesorios Industriales supplies it in Buenos Aires, Argentina, with technical advice to choose the correct size.

The SFT-T series designation is read in parts: SFT identifies the 2-bolt flange housing, T corresponds to the mounting variant and the number that follows indicates the nominal shaft diameter. Thus, SFT-204TMC and SFT-205TMC are different sizes within the same family, and SFT-210TMC or SFT-211TMC cover larger shafts. The TMC suffix distinguishes the sealing and insert attachment configuration. With the full part number, each size in the series is identified unambiguously.

These pillow blocks are used in belt and roller conveyors, mixers, mills, bucket elevators, centrifugal pumps and process equipment in food, chemical and aggregate treatment plants. In Argentina they are common in packaging lines, balanced feed plants and material handling systems where a compact flange is needed and the shaft must be perpendicular to the mounting surface. They are also used in industrial fans and blowers.

To select the pillow block, start from the shaft diameter and the type of load: radial, axial or combined. Verify that the flange has enough space for the two fastening holes and that the mounting surface is flat and clean. The insert usually comes pre-lubricated; in service it is advisable to check the sealing, the working temperature and the presence of dust or moisture. When mounting, align the shaft with the pillow block and tighten the fastening bolts evenly so as not to deform the housing.

Flange Y-bearings are available from several brands with their own nomenclatures. Interchangeability depends on the shaft diameter, the distance between holes, the flange diameter and the type of insert attachment, not only on the part number. Therefore, if the equipment carries another brand, it is advisable to compare those critical dimensions before replacing. MR Accesorios Industriales will indicate the compatible alternative within the SFT-T series or other equivalent lines.

If you already have the pillow block part number or the shaft size, send it by WhatsApp to MR Accesorios Industriales and we will quote you promptly. We can also guide you if you need a sealing variant, a flange with a different distance between holes or a split plummer block housing from our in-house manufacturing. With the equipment data and a photo of the mounting, the technical team defines the option that best suits your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.