Flange bearing 2 holes SEALMASTER SFT-207

SEALMASTER SFT-207 is a flange bearing 2 holes reference, within Bearing housings. Request a quote for SFT-207 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SFT bracket is a two-bolt flange mounted bearing that combines an insert bearing with a cast iron housing. It is used to support shafts in equipment where a compact front mounting and simple alignment are required. MR Accesorios Industriales distributes the SEALMASTER brand in Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The SFT designation identifies the series of two-bolt flange brackets. The number following the hyphen indicates the size of the insert bearing: for example, SFT-8, SFT-9 and SFT-10 are increasing sizes within the same family. Each part number refers to an assembled unit, with the housing and insert already selected for that shaft diameter. To order the correct replacement, simply send the complete part number via WhatsApp.

These brackets are used in conveyors, mixers, fans, belts and process lines where the shaft is mounted on a vertical flange. In Argentina they are common in food, cement, paper and agricultural plants, because they solve shaft support where little space is available. The two-bolt flange allows the bracket to be fixed to a wall or structure and keeps the insert bearing centered with respect to the shaft.

To choose correctly, take into account the shaft diameter, the type of load and the environmental conditions. The insert seal determines whether the bracket withstands dust, water or frequent washdowns. The lubrication must be compatible with the rotation speed and working temperature. During assembly, make sure the flange sits flat and that the bolts are tightened evenly so as not to deform the housing or misalign the shaft.

SEALMASTER SFT brackets are interchangeable with other equivalent lines of two-bolt flange mounted bearings, provided the shaft diameter, the distance between holes and the insert locking type match. This equivalence is resolved by comparing the designation and the main dimensions, not just the part number. If you need to replace a bracket from another brand, send us the part number and dimensions at MR Accesorios Industriales and we will indicate the compatible alternative.

To request a quote for an SFT bracket, write to us via WhatsApp with the complete part number (for example, SFT-10) or with the shaft diameter and flange dimensions. At MR Accesorios Industriales we reply promptly with the option that corresponds to your equipment. We can also advise you on the most suitable insert and seal for the working environment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.