Flange bearing 2 holes SEALMASTER SFT-16C CR

SEALMASTER SFT-16C CR is a flange bearing 2 holes reference, within Bearing housings. Request a quote for SFT-16C CR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

SEALMASTER SFT-C CR series housings are two-bolt flange mounted bearing units, designed to secure rotating shafts to flat structures. They are used when the shaft must be perpendicular to the mounting surface and firm support with alignment capability is required. MR Accesorios Industriales supplies this line as a brand, with options for different shaft sizes and industrial applications.

The SFT-C CR designation is read in parts: SFT identifies the two-bolt flange housing family; the C indicates the construction variant within that family, and CR indicates the type of sealing or protection incorporated. The numbers appearing in the examples, such as SFT-12C CR or SFT-20C CR, correspond to different shaft sizes within the series. Each complete code defines a specific combination of size and configuration.

These housings are used in conveying, ventilation, agitation and general transmission equipment. In Argentine industry they appear in conveyor belts, mixers, centrifugal pumps, exhaust fans and food and beverage machinery. Their two-bolt flange mounting allows them to be fastened to sheet metal or steel structures with precise orientation, which is common in equipment where the shaft must be perpendicular to the support plane.

To select the correct housing, take into account the shaft diameter, the type of load and the environmental conditions. The SFT-C CR series incorporates sealing that retains lubricant and blocks the entry of dust or moisture. During mounting, verify the alignment between the flange holes and the support surface, and make sure the bearing is properly seated. Proper lubrication and stress-free fitting extend the service life of the assembly.

When looking for equivalents from other brands, compare the series, flange type, number of holes and shaft diameter. Standardized dimensions make it possible to find compatible alternatives, but it is advisable to confirm the critical dimensions before replacing a unit. At MR Accesorios Industriales we can indicate the compatible alternative or manufacture it to measure if you need a special configuration.

If you have the code of the housing you are looking for, send it by WhatsApp to MR Accesorios Industriales and we will quote it promptly. You can also ask us about other sizes in the SFT-C CR series or about flange housings with different sealing configurations. With the code or model you need, we give you a technical and direct answer.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.