Product page
Cartridge bearing SEALMASTER SC-205
- Manufacturer Part Number
- SC-205
- Brand
- SEALMASTERBrand we market
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SC
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SEALMASTER SC-205 is a cartridge bearing reference, within Bearing housings. Request a quote for SC-205 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SEALMASTER SC series Y-bearing unit is a cartridge mounted bearing that combines an outer ring with a ball insert and a shaft locking system. It is used to support rotating shafts in equipment where alignment and protection against contaminants are required. MR Accesorios Industriales supplies this line for industrial applications in Buenos Aires, Argentina.
The SC series designation reads as a size code: SC-8, SC-9, SC-10 and so on. The number following the letters indicates the size of the housing and the insert bearing. The higher the number, the larger the shaft diameter and load capacity. This series is part of the cartridge mounted bearing line, with a compact design that facilitates installation in tight spaces.
These units are used in conveyors, belts, mixers, fans and agricultural machinery. In Argentina, they are common in food, cement, mining and aggregate processing plants, where the environment is dusty or humid. Their robust construction absorbs slight misalignments and combined loads, extending equipment service life.
To select the correct unit, take into account the shaft diameter, radial and axial loads, and environmental conditions. The insert sealing is key: choose labyrinth or oil seal depending on exposure to dust or water. Lubrication must be adequate and installation must be carefully aligned to avoid stress. Secure the insert to the shaft with the set screws or the corresponding locking system.
SEALMASTER SC series units are interchangeable with other brands of cartridge mounted bearings that follow the same standardized dimensions. When requesting a quote, provide the complete part number and working conditions. MR Accesorios Industriales advises you to find the right equivalent or compatible alternative.
If you need a Y-bearing unit for your application, send the part number or dimensions via WhatsApp to MR Accesorios Industriales. We will quote you promptly and indicate the best option for your equipment.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the SC series mean in SEALMASTER units?
- The SC series identifies cartridge mounted bearings with a specific housing and locking design. The accompanying number, such as SC-8 or SC-12, indicates the shaft and housing size. The higher the number, the greater the load capacity.
- How do I choose the right unit for my shaft?
- You need to know the shaft diameter, radial and axial loads, and the working environment. With that data, we will indicate the corresponding SC part number and the most suitable sealing type for your application.
- Are SC units compatible with other brands?
- Yes, cartridge mounted bearings with standardized dimensions are usually interchangeable between brands. If you provide us with another brand's part number, we will quote the SEALMASTER equivalent or a compatible alternative.