Piloted flange bearing SEALMASTER RFP-65MM

SEALMASTER RFP-65MM is a piloted flange bearing reference, within Bearing housings. Request a quote for RFP-65MM via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SEALMASTER RFP series piloted flange housing is a mounted bearing ready to install in applications where the flange is fastened to a machined face. The piloted flange centers the assembly in the housing and allows it to be bolted in place without machining an additional seat. It is used in transmission, conveying and process equipment where a compact, easily replaceable unit is required. MR Accesorios Industriales supplies this line as a brand.

The RFP series designation is read from the number that follows the letters: that number indicates the bearing bore diameter in millimeters. Therefore, an RFP-35MM corresponds to a 35 mm bore, an RFP-40MM to 40 mm, and so on. The MM suffix confirms that the measurement is expressed in millimeters, not inches. Within the series, part numbers such as RFP-35MM, RFP-40MM, RFP-45MM, RFP-50MM, RFP-55MM, RFP-60MM, RFP-65MM and RFP-70MM cover a continuous range of metric sizes to suit different shaft diameters.

These housings are used in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment in food, chemical and aggregate processing plants. In Argentina, they are common in the oilseed, meatpacking and milling industries, where the piloted flange simplifies mounting on sheet metal or cast iron and withstands combined loads. They also appear in road machinery and material handling equipment operating in dusty or humid environments.

To select the housing, verify that the shaft diameter matches the number in the designation and that the flange has the correct pilot for the housing. Check the sealing: SEALMASTER housings usually incorporate lip seals that protect against contaminants; if the environment is very dirty, additional protection is advisable. During mounting, align the flange with the mounting face and tighten the bolts in a cross pattern to avoid distortion. Lubrication must follow the manufacturer's recommendation and be renewed according to service conditions.

Piloted flange mounted housings are available from different brands under their own nomenclatures. When looking for a replacement, do not rely on the part number alone: compare the bore diameter, flange type, bolt hole center distance and sealing system. Often a housing from another brand with the same shaft size and similar flange configuration can be interchanged, but it is always advisable to confirm the critical dimensions before installing. If in doubt, send us the measurements or the drawing and we will indicate the compatible alternative.

If you need a SEALMASTER RFP series housing, write to us on WhatsApp with the complete part number (for example, RFP-45MM) or with your shaft and flange measurements. At MR Accesorios Industriales we will quote you promptly and advise you so you order the correct reference. We can also offer alternatives if you are looking for a variant with a different type of seal or fixing.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.