Insert bearing SEALMASTER RCI-115MM

SEALMASTER RCI-115MM is a insert bearing reference, within Bearings. Request a quote for RCI-115MM via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SEALMASTER RCI-M series insert bearing is a spherical roller bearing with an extended inner ring, designed to be mounted in split plummer block housings and bearing units. It is used in equipment where the shaft must be secured with set screws and the housing allows for misalignment. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and advises you on choosing the correct part number for your application.

The RCI-M designation is read in parts: RCI identifies the family of insert bearings with an extended inner ring, M indicates the metric series, and the number after the hyphen corresponds to the shaft diameter in millimeters. Thus, RCI-35MM is for a 35 mm shaft, RCI-40MM for 40 mm and RCI-50MM for 50 mm, for example. The series covers sizes up to RCI-70MM. When requesting a quote, send the complete part number so we can give you the exact insert.

These bearings are mounted in split plummer block housings and bearing units used in conveyors, belts, elevators, mills, mixers and process equipment. In Argentina you will find them in food, cement, mining and paper plants, and in production lines where the shaft rotates at moderate speeds and small misalignments need to be absorbed. They are also used in industrial fans and large centrifugal pumps.

To select the insert, take into account the shaft diameter, the type of load and the environmental conditions. Sealing is key: if there is dust or water, choose the variant with a reinforced seal. Verify that the housing is compatible with the RCI-M series and that the set screws of the inner ring match the shaft hardness. Lubrication must be the one specified for spherical roller bearings, and mounting must ensure alignment between housings.

As for equivalents, insert bearings are interchangeable between brands if the main dimensions, type of locking and sealing match. It is not enough for the shaft diameter to be the same: you must compare the inner ring width, the set screw thread and the housing geometry. If your equipment carries another brand, send us the part number and we will indicate the compatible alternative from SEALMASTER or from another brand we supply.

MR Accesorios Industriales has more than 80 years in the industry and supplies the SEALMASTER brand in Buenos Aires, Argentina. If you need an RCI-M insert, send the part number by WhatsApp and we will quote it promptly. We also advise you if you have doubts about the seal variant or the interchangeability with the bearing you are replacing.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.