SEALMASTER RCI-100MM insert bearing

SEALMASTER RCI-100MM is a reference of insert bearing, within Bearings. Request a quote for RCI-100MM via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SEALMASTER RCI-M series insert bearing is a spherical roller bearing with an extended inner ring, designed to be mounted in split plummer block housings and housing units. It is used in equipment where the shaft must be secured with set screws and the housing allows for misalignment. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and advises you on choosing the correct part number for your application.

The RCI-M designation is read in parts: RCI identifies the family of insert bearings with an extended inner ring, M indicates the metric series and the number that follows the hyphen corresponds to the shaft diameter in millimeters. Thus, RCI-35MM is for a 35 mm shaft, RCI-40MM for 40 mm and RCI-50MM for 50 mm, for example. When requesting a quote, provide the complete part number so we can give you the exact insert.

These bearings are mounted in split plummer block housings and housing units used in conveyors, belts, elevators, mills, mixers and process equipment. In Argentina you will find them in food, cement, mining and paper plants and in production lines where the shaft rotates at moderate speeds and it is convenient to absorb small misalignments. They are also used in industrial fans and large centrifugal pumps.

To select the insert, take into account the shaft diameter, the type of load and the environmental conditions. Sealing is key: if there is dust or water, choose the variant with a reinforced seal. Verify that the housing is compatible with the RCI-M series and that the set screws of the inner ring match the shaft hardness. Lubrication must be the one specified for spherical roller bearings and mounting must ensure alignment between housings.

Regarding equivalents, insert bearings interchange between brands if the main dimensions, locking type and sealing match. It is not enough for the shaft diameter to be the same: the inner ring width, the set screw thread and the housing geometry must be compared. If your equipment carries another brand, send us the part number and we will indicate the compatible alternative from SEALMASTER or from another brand we sell.

MR Accesorios Industriales sells the SEALMASTER brand in Buenos Aires, Argentina. If you need an RCI-M insert, send the part number via WhatsApp and we will quote it promptly. We also advise you if you have doubts about the sealing variant or the interchangeability with the bearing you are replacing.