Flange bearing 2 holes SEALMASTER MSFT-32

SEALMASTER MSFT-32 is a flange bearing 2 holes reference, within Bearing housings. Request a quote for MSFT-32 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The MSFT housing is a 2-bolt flange mounted bearing that combines a self-aligning insert with a cast housing. It is used to support shafts in equipment where mounting is on a flat surface, with the fixation holes aligned. The SEALMASTER MSFT series, a brand MR Accesorios Industriales sells, covers sizes for shafts of different diameters. It is selected by shaft diameter and insert fixation type.

The MSFT designation reads as a family of two-bolt flange housings. The number following the hyphen identifies the shaft size for which the insert is made: that is why references such as MSFT-15, MSFT-16, MSFT-19 or MSFT-20 coexist in the same series. Each part number refers to a different shaft diameter, and the numeric suffix is the data you must provide so we can quote the exact size. Do not confuse the number with a housing dimension: it is the reference of the insert plus housing assembly.

These housings appear in belt conveyors, bucket elevators, mixers, screens and process lines in food, chemical and aggregate plants. In Argentina they are seen in milling equipment, plant conveyor belts and grain machinery, where the two-bolt flange allows the housing to be fixed to a frame or structural sheet metal with simple alignment. They are also used in fans and horizontal-shaft pumps that need a support with some angular tolerance.

To select the housing, start from the shaft diameter shown in the part number and check the insert fixation type: there are ones with set screws, with eccentric collar or with taper sleeve, and each requires a different mounting. Check the insert sealing according to the environment: dust, water or frequent washing call for more closed labyrinths or seals. During mounting, rest the flange on a clean, flat surface, tighten the screws in a cross pattern and check that the shaft turns without effort. Insert lubrication is done with compatible grease and without overloading.

Interchangeability between brands of mounted housings is resolved by flange dimensions, shaft diameter and insert type, not by the commercial part number. An MSFT of one size can be replaced by an equivalent housing from another firm if hole spacing, center height and fixation system match. For that it is best to compare drawings or measure the old housing. At MR Accesorios Industriales we indicate the compatible alternative when you provide those dimensions or the original part number.

If you need an MSFT housing for equipment that is down, send us the complete part number on WhatsApp, for example MSFT-23 or MSFT-27, and we will quote it promptly. You can also send us a photo of the housing and the flange dimensions if you do not have the reference at hand. We work with the SEALMASTER line and with equivalent alternatives so that the assembly keeps running.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.