Flange bearing 4 holes SEALMASTER MSF-27

SEALMASTER MSF-27 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for MSF-27 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The MSF bracket is a four-bolt flange mounted bearing with insert, from the SEALMASTER line. It is used to support rotating shafts on a flat surface, with the insert seated in the flange and secured by bolts. It is a common solution in equipment where the shaft runs horizontally and the load is radial, with some axial thrust depending on the insert. MR Accesorios Industriales sells it in Buenos Aires, Argentina, and quotes it via WhatsApp.

The MSF series is identified by those three letters and a two-digit number that orders the sizes within the family: MSF-15, MSF-16, MSF-19, MSF-20, MSF-23, MSF-24, MSF-27 and MSF-28 are examples of that progression. The number is not a diameter or a measurement in millimeters: it is the size reference the manufacturer assigns to each combination of flange and insert. To choose correctly, send the full part number and the dimensions of the shaft where it is mounted.

These brackets appear in conveyors, belts, elevators, mixers, blowers and process lines. In Argentina they are seen in food plants, meat processing plants, mills, water treatment plants and material handling equipment, where flange mounting solves the support on sheet metal or structure without machining. They are also used in agricultural machinery and washing equipment, because the flange allows the four holes to be fastened from one side.

To select the bracket, take into account the shaft diameter, the type of load and the direction of thrust. The sealing of the insert defines the working environment: an area with dust is not the same as one with water or washing. During mounting, seat the flange on a flat, clean surface, tighten the four bolts in a cross pattern and check shaft alignment before starting up. Lubrication of the insert and internal clearance are controlled according to the type of insert the bracket comes with.

As for interchangeability, four-bolt flange brackets are compared between brands by the hole spacing, the shaft diameter and the center height. It is not enough for the part number to look similar: those dimensions must be cross-referenced. If the part number you are looking for does not appear among the examples in the series, write to us on WhatsApp with the model or dimensions and we will indicate the compatible alternative or manufacture it to measure.

MR Accesorios Industriales sells the SEALMASTER brand and brings more than 80 years of work in the field. If you need to replace an MSF bracket, send the part number via WhatsApp along with the shaft dimensions and the hole spacing: we will quote it shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.