Flange bearing 2 holes SEALMASTER CRFTS-PN31T

SEALMASTER CRFTS-PN31T is a flange bearing 2 holes reference, within Bearing housings. Request a quote for CRFTS-PN31T via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SEALMASTER CRFTS-PN-T series 2-bolt flange mounted bearing is a ready-to-mount assembly that combines an insert bearing with a flange housing. It is used to support shafts in structures where mounting is done on a flat face, with two fastening points. It is a practical solution for transmission and conveying equipment that needs alignment and simple support.

The CRFTS-PN-T series designation reads in blocks. The letters CRFTS identify the housing type: 2-bolt flange. The PN block corresponds to the mounting and locking variant. The final letter T indicates the insert or sealing type. The numbers appearing in the examples, such as CRFTS-PN12T or CRFTS-PN24T, indicate the nominal shaft diameter in inches. Thus, CRFTS-PN12T is for a 12 inch shaft and CRFTS-PN16T for a 16 inch shaft. This reading allows you to quickly locate the reference you need.

In Argentine industry, these mounted bearings are seen in belt conveyors, bucket elevators, mixers, mills and process equipment. Also in machines for food, beverages and packaging, where cleanliness and sealing are important. Being flange mounted, they adapt to walls or frames where the shaft must be perpendicular to the mounting surface. MR Accesorios Industriales sells this SEALMASTER line for replacement and new projects.

To choose well, take into account the shaft diameter, the type of load and the environmental conditions. The insert sealing defines the protection against dust, water or process agents. Proper lubrication and the possibility of relubrication extend service life. During mounting, verify that the flange sits flat and that the bolts are tightened evenly to avoid deformation. Aligning the shaft with the housing prevents stress and vibration.

Flange mounted bearings are available from several brands with their own nomenclatures. Equivalences are established by dimensions: shaft diameter, hole spacing and overall height. There is no single interchange rule between part numbers, so it is advisable to compare drawing against drawing. If you need to replace a SEALMASTER CRFTS-PN-T, the safest approach is to start from the shaft and housing dimensions. MR helps you find the compatible alternative.

If you have the part number of the flange mounted bearing, send it via WhatsApp to MR Accesorios Industriales. We will quote it promptly. If you are looking for a variant you do not see, write to us with the model or the dimensions you need and we will indicate the corresponding option.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.