Piloted flange bearing SEALMASTER CRFCF-PN32R

SEALMASTER CRFCF-PN32R is a piloted flange bearing reference, within Bearing housings. Request a quote for CRFCF-PN32R via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SEALMASTER CRFCF-PN series housing is a piloted flange mounted bearing: the unit combines the cast housing with the bearing already inserted and locked, so it mounts as a single piece onto the machine face. It is used when a rotating shaft must be supported against a flat surface and the housing cannot slide in from the side, which is common in process, conveying and material handling equipment.

The series designation reads in blocks. The initial letters identify the housing type and its flange configuration, and the PN suffix defines the unit variant within that family. The number appearing before the final R is the size code: that is why CRFCF-PN20R and CRFCF-PN32R are two different sizes of the same series, not two different products. Send that code by WhatsApp and MR Accesorios Industriales will quote the unit that matches your shaft.

These housings appear in belt and chain conveyors, elevators, mixers, blowers, pumps and process equipment where the shaft is supported on a flange bolted to a panel or structure. In food, chemical, aggregate and water treatment plants they are chosen precisely because mounting is frontal and the housing remains accessible for inspection and relubrication without dismantling the entire equipment.

To select the unit, start from the shaft diameter you need and the flange hole pattern: the piloted design centers the housing in the machined bore, so the fit between pilot and bore defines alignment. Also review the sealing according to the environment (dust, water, washdown), the lubricant type and the possibility of relubrication. During mounting, tighten the flange in a cross pattern and check that the shaft turns freely before starting the machine.

Equivalent units from different brands with their own nomenclatures coexist in the market: two similar-looking codes may differ in locking system, sealing or housing tolerances. Interchangeability is confirmed by comparing shaft dimensions, pilot, flange pattern and insert type, not just the code. If you send us the original code or a photo of the nameplate, we will indicate the compatible alternative from the CRFCF-PN series.

If the equipment is down, send by WhatsApp the code on the old housing, the shaft size or the machine model. With that we will quote the corresponding SEALMASTER unit from the CRFCF-PN series and, if you need another flange or sealing configuration, we will indicate the alternative within the mounted bearing line. Response is provided shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.