Flange bearing 2 holes SEALMASTER CRFBS-PN22T

SEALMASTER CRFBS-PN22T is a flange bearing 2 holes reference, within Bearing housings. Request a quote for CRFBS-PN22T via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SEALMASTER CRFBS-PN-T housing is a two-bolt flange mounted bearing, designed to fix rotating shafts to flat structures in industrial applications. It is used when the shaft must be perpendicular to the mounting surface, with a flange that is bolted directly. MR Accesorios Industriales sells this SEALMASTER line in Buenos Aires, Argentina, with technical advice to choose the correct configuration according to the equipment.

The CRFBS-PN-T designation is read in blocks: CRFBS identifies the two-bolt flange housing family; PN indicates the mounting variant; the final letter T indicates the type of sealing or finish. The number that appears between PN and T —as in CRFBS-PN12T, CRFBS-PN16T or CRFBS-PN23T— corresponds to the housing size and the shaft diameter it accommodates. Each complete part number defines a specific combination of flange, housing and insert bearing.

These housings are used in conveyors, mixers, pumps, fans and process equipment where the shaft works in a position perpendicular to the base. In Argentina they are seen in food, chemical, cement plants and in material handling systems. The two-bolt flange allows mounting on sheet metal or structure with aligned holes, and the insert bearing accepts slight misalignment typical of mounting.

To select the correct housing, take into account the shaft diameter, the type of load —radial, axial or combined— and the environmental conditions. The T sealing protects against dust and humidity, so it is advisable in environments with particles or frequent washdowns. During mounting, verify that the flange rests flat, tighten the bolts in a cross pattern and lubricate the insert according to the working regime. Shaft alignment with the flange avoids lateral stresses.

SEALMASTER mounted housings are interchangeable with other brands that use the same flange standard and shaft diameter. When requesting a quote, compare the hole spacing, shaft diameter and insert fixing type. If the original part number is not available, an alternative compatible with the same mounting dimensions can be offered. MR Accesorios Industriales advises you so that the substitution does not affect the equipment operation.

To proceed with the quote, send the complete part number by WhatsApp —for example CRFBS-PN20T— or indicate the flange dimensions and shaft diameter. We will quote you promptly and indicate the compatible alternative if necessary. MR Accesorios Industriales sells SEALMASTER in Buenos Aires, Argentina, with more than 80 years of experience in bearings and housings.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.