Coupling RUADIGON X-11 (X-95) — Coupling with solid hubs

RUADIGON X-11 · Acople con mazas llenas is a coupling reference, within Power transmission. Request a quote for X-11 · Acople con mazas llenas via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The RUADIGON X-11 coupling with solid hubs is a power transmission component that joins two shafts to transmit torque continuously. Its commercial designation identifies it as X-11 and it is equivalent to model X-95. It is used in equipment that requires a robust coupling with simple maintenance, and MR Accesorios Industriales carries it as part of its coupling line. If you need to confirm the exact size for your application, send us the part number on WhatsApp and we will advise you.

This item is a RUADIGON coupling identified as model X-11, which is equivalent to the X-95. It is a coupling with solid hubs, that is, with solid hubs at both ends, without internal cavities. That configuration gives it greater rigidity and resistance to torsional loads.

Couplings with solid hubs are used in drives where shaft alignment is reasonably good and a firm mechanical connection is required. They appear in pumps, fans, conveyor belts, mixers and machine tools. Also in process equipment that runs with continuous rotation. Since they have no internal flexible parts, they do not compensate for large misalignments, but they simplify assembly and reduce wear points. If your original equipment has an X-95, this X-11 is the direct equivalent.

To properly select a coupling of this type, first check the diameter and length of the shaft at each end, the keyway and the nominal torque of the drive. Also review the rotation speed and the working environment: temperature, dust or humidity may require additional protection. During assembly, align the shafts with a dial indicator or a straightedge and feeler gauge before tightening the hubs. Excessive misalignment accelerates wear on bearings and seals. If you do not have the equipment data sheet, send us a photo of the old coupling and the measurements taken with a caliper.

If you need a nearby size or an equivalent from another brand, the most practical thing is to send us the complete part number shown on the part or in the manual. With that data and the shaft measurements we can look for the alternative within the RUADIGON line or suggest a compatible replacement. We can also guide you if the original coupling is no longer available and a similar model has to be adapted. The more accurate the information you send, the faster we can reach a specific option.

To request a quote for the RUADIGON X-11 coupling or ask about the X-95 equivalent, write to us on WhatsApp with the part number and the shaft measurements. At MR Accesorios Industriales we handle technical inquiries and help you define the right option for your equipment. We can also check whether there are alternatives within the same coupling category. Send us the data and we will take it from there.