RINGSPANN REK 0075 DGZ coupling de mordazas

RINGSPANN REK 0075 DGZ is a reference of coupling de mordazas, within Power transmission. Request a quote for REK 0075 DGZ via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The RINGSPANN REK DGZ jaw coupling is a power transmission component that connects two shafts and transmits torque while absorbing misalignment. Its jaw design with an intermediate elastomer compensates for radial, angular and axial displacement, reducing vibration and protecting equipment. It is used in pumps, gearboxes, fans and general machinery. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, with technical advice to choose the right model.

The REK DGZ series designation is read step by step: REK identifies the jaw coupling family; the four-digit number that follows — as in REK 0028 DGZ or REK 0042 DGZ — indicates the coupling size, which correlates with the maximum permissible shaft diameter and torque capacity; the suffix DGZ indicates a construction variant within the series, usually associated with the type of elastomer or the jaw configuration. The examples REK 0048 DGZ, REK 0055 DGZ, REK 0060 DGZ, REK 0065 DGZ, REK 0075 DGZ and REK 0080 DGZ show the progression of available sizes.

These couplings are used in Argentine industries such as food, chemical, petrochemical, cement and water treatment. They are found in centrifugal pumps, gearboxes, fans, compressors, conveyor belts and mixers. Their ability to absorb misalignment and damp vibration makes them suitable for equipment where extreme alignment precision is not required, but reliability and ease of maintenance are.

To select a REK DGZ coupling, take into account the nominal and maximum torque of the drive, the rotation speed, the shaft diameters and the type of load. The intermediate elastomer defines the torsional stiffness and damping capacity; choose the compound according to temperature and environment. During assembly, check shaft alignment with straightedges or a dial indicator, respect the recommended axial clearance and secure the hubs with the corresponding set screws or keys. No lubrication is required in these couplings, but periodic inspection of the elastomer is.

As for equivalents, RINGSPANN REK DGZ jaw couplings can be interchanged with other brands that follow the same standard for dimensions and capacities, such as the L, AL or similar series. Interchangeability depends on shaft diameter, torque and mounting dimensions. Always check the drawings and tolerances before replacing one coupling with another from a different manufacturer. MR Accesorios Industriales can advise you with the technical comparison.

If you need a RINGSPANN REK DGZ jaw coupling, write to us on WhatsApp with the full part number or the model you are looking for. At MR Accesorios Industriales we reply promptly with the quote.