Shrink disc cover RINGSPANN 5025-228901-000000

RINGSPANN 5025-228901-000000 is a shaft-hub connection reference, within Power transmission. Request a quote for 5025-228901-000000 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The shrink disc cover is a protective component that is mounted on RINGSPANN shrink discs, such as models RLK 608 and RLK 606. Its function is to cover the mechanism, prevent the entry of contaminants and retain the lubricant in the clamping area. MR Accesorios Industriales supplies this cover as exclusive representative in Argentina of RINGSPANN, with more than 80 years of experience in power transmission.

The code of these covers is structured in numeric blocks. For example, 5025-070901-000000 and 5025-078901-000000 share the prefix 5025, which identifies the family of accessories for shaft-hub connections. The second block, such as 070901 or 087901, varies according to the shrink disc for which the cover is intended. The examples 5025-108901-000000 and 5025-113901-000000 show that the first digits of that block change with size. To select the correct cover, identify the shrink disc model and consult the compatibility table.

These covers are used in applications where RINGSPANN RLK 608 and RLK 606 shrink discs are exposed to environments with dust, humidity or splashes. Industries such as food, chemical, cement and steel in Argentina use them to protect shaft-hub connections in conveyors, mixers, pumps and gearboxes. They are also common in mining equipment and agricultural machinery, where pressure washing or outdoor conditions require additional sealing.

To choose the right cover, take into account the shrink disc model and the shaft diameter. The cover must fit without interfering with the tightening screws and allow access for assembly and inspection. During installation, verify that the disc surface is clean and free of burrs. The disc must be lubricated before placing the cover, since the cover retains the grease and prevents it from being washed out. The alignment between shaft and hub must meet the disc tolerances so as not to force the cover.

RINGSPANN shrink disc covers are interchangeable with those of other manufacturers that offer discs of similar dimensions, provided that the outer diameter and screw locations match. However, to guarantee a correct fit and adequate protection, it is recommended to use the original cover from the same manufacturer as the disc. MR Accesorios Industriales can advise you on equivalence with other brands, without the need to invent codes: only the disc model and the main measurements are required.

If you need a cover for your RINGSPANN shrink disc, write to us on WhatsApp with the complete code or the disc model. At MR Accesorios Industriales we reply shortly with availability and the quote. As exclusive representative in Argentina of RINGSPANN, we have access to the complete line of accessories for shaft-hub connections. Do not hesitate to ask us about variants or special applications.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.