Flange bearing 4 holes REXNORD ZPS6415F

REXNORD ZPS6415F is a flange bearing 4 holes reference, within Bearing housings. Request a quote for ZPS6415F via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Rexnord ZP6000 series 4-bolt flange housings are mounted units that combine an insert bearing with a flange housing, designed to fix drive shafts onto flat structures. They are bolted through their four holes and leave the shaft perpendicular to the mounting plane, which simplifies assembly in equipment where there is no room for a pillow block housing. MR Accesorios Industriales supplies them in Buenos Aires, Argentina, and quotes them on WhatsApp according to the part number you need.

The ZP6000 series designation is read in blocks: the letters ZPS identify the four-bolt flange housing, the following four digits order size and configuration within the family, and the F suffix closes the reference. That is why codes such as ZPS6303F, ZPS6311F or ZPS6515F coexist: the numeric block changes, not the type of unit. The central number is what defines the shaft size and the housing; send us the complete part number and we will indicate the corresponding variant.

These housings appear in belt and screw conveyors, mixers, blowers, centrifugal pumps, packaging lines and water treatment equipment. In Argentine plants in the food, cement, chemical and aggregate processing industries, they are used where the shaft must be supported on a plate or frame and access for lubrication is limited. The four-bolt flange distributes the load over the mounting plane and allows the unit to be removed without taking out the entire shaft.

To choose correctly, take into account the shaft diameter, the type of shaft fixing the unit accepts, the sealing required according to the environment (dust, water, washdown) and the planned lubrication. When mounting, seat the flange on a flat, clean surface, tighten the four bolts in a cross pattern and check shaft alignment before start-up. A poorly seated flange generates axial load and shortens the life of the insert bearing.

Regarding interchangeability, mounted flange units are compared across brands by shaft size, hole layout and insert type, not by commercial code. If the equipment carries another brand, send us the code stamped on the housing or the mounting dimensions and we will indicate the compatible alternative from the ZP6000 series. The nomenclature does not need to match: geometry is what matters.

If you are looking for a part number you do not see among the examples, write to us on WhatsApp with the model or the shaft dimensions and the distance between holes. At MR Accesorios Industriales we will quote the Rexnord housing you need and reply promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.