REXNORD ZLFS6607F flange bearing 4 holes

REXNORD ZLFS6607F is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for ZLFS6607F via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Rexnord ZLFS bearing of the 6000 series is a 4-bolt flange mounted bearing unit, designed to secure rotating shafts to flat structures with simple and firm alignment. It is used in equipment where the bearing must rest on a wall or structural sheet, with the shaft passing through and the flange held by four bolts. MR Accesorios Industriales sells this line for plants and workshops throughout the country.

The ZLFS designation is read in parts: the letters indicate the flange bearing unit type, and the number that follows identifies the series and size. In the examples ZLFS6507F, ZLFS6515F, ZLFS6607F, ZLFS6608F and ZLFS6615F, the middle digits refer to the 6000 series and the housing size; the final letter F indicates the fastening or sealing variant according to the catalog. To choose the right code, the most practical thing is to provide the shaft diameter and the mounting type.

These bearing units appear in belt and screw conveyors, mixers, blowers, centrifugal pumps, screens and process equipment in food, chemical and aggregate treatment plants. In Argentina they are seen in sugar mills, balanced feed plants, quarries and metallurgical facilities, where the 4-bolt flange simplifies anchoring onto folded sheet or profile structures. They are also used in industrial washing machines and draft fans.

To select properly, take into account the shaft diameter, the load type and the direction of the forces: the flange works well when the load is mainly radial and moderate. Check the available sealing according to the environment, because in areas with dust or water additional protection is advisable. During installation, rest the flange on a flat, clean surface, tighten the four bolts in a cross pattern and check shaft alignment before start-up. Lubrication and internal clearance are already defined at the factory.

As for equivalences, 4-bolt flange bearing units are interchangeable between brands by series number and shaft size, not by the full code. If the equipment has a bearing unit from another brand, the usual approach is to compare the series, the shaft diameter and the distance between the flange holes. MR Accesorios Industriales will indicate the compatible alternative within the Rexnord line or the other brands it sells, without you having to adapt the machine.

If you already have the code of the bearing unit you need, send it via WhatsApp to MR Accesorios Industriales and we'll quote it promptly. If you don't have it at hand, send us the shaft diameter, the equipment series and a photo of the flange: with that data we'll indicate the corresponding ZLFS. We also manufacture split plummer block housings and custom parts for special cases.