Flange bearing 4 holes REXNORD ZFS6090MM

REXNORD ZFS6090MM is a flange bearing 4 holes reference, within Bearing housings. Request a quote for ZFS6090MM via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Rexnord ZFS series 4-bolt flange housing is a mounted bearing that is fastened with four bolts onto a flat face, with the shaft perpendicular to the flange. It is used when the bearing must be supported against a wall, a frame or structural sheet metal, and not on feet. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with more than 80 years of experience in power transmission components.

The ZFS designation combines letters and numbers: ZF identifies the flange housing family, S indicates the mounting variant, and the four-digit numeric block defines the size. The MM suffixes appearing in the examples (ZFS6035MM, ZFS6045MM, ZFS6050MM) correspond to the housing and sealing execution. The ZF9000 series and the 6000 series group these sizes; each complete code identifies a constructional combination. To choose, provide the complete code shown on the nameplate or drawing.

These housings are used in belt and chain conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment. In Argentina they are common in food plants, cement plants, tanneries, effluent treatment plants and packaging lines, where the bearing is mounted on a vertical or horizontal flange and receives moderate radial and axial load. They are also used in old machines where the complete housing is replaced to restore alignment.

To select the housing, check the shaft diameter, the distance between flange holes and the bolt circle diameter. Check the sealing type: versions with single or double lip seals retain grease and block the entry of dust and water. The internal clearance and lubrication must be those of the inserted bearing; do not mix seals of different execution in the same equipment. During mounting, rest the flange on a clean, flat surface, tighten the four bolts in a cross pattern and check alignment with a straightedge or dial indicator before starting up.

Rexnord flange housings are interchangeable with those of other brands that follow the same flange dimensions and shaft diameter. Interchangeability is not automatic: the center height, the type of inner ring fixing or the sealing may vary. If the original code is not available, the compatible alternative is sought by dimensions and load capacity. MR Accesorios Industriales indicates the option that best fits your equipment.

If you need a Rexnord ZFS flange housing, send the complete code via WhatsApp to MR Accesorios Industriales. We will quote you promptly and, if applicable, indicate the compatible alternative. We can also evaluate the manufacture of special housings according to drawing.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.