REXNORD ZFS6075MM flange bearing 4 holes

REXNORD ZFS6075MM is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for ZFS6075MM via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Rexnord ZFS series 4-bolt flange housing is a mounted bearing fastened with four bolts onto a flat surface, with the shaft perpendicular to the flange. It is used when the bearing must rest against a wall, frame or structural plate rather than on feet. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, in power transmission components.

The ZFS designation combines letters and numbers: ZF identifies the flange housing family, S indicates the mounting variant, and the four-digit number block defines the size. The MM suffixes appearing in the examples (ZFS6035MM, ZFS6045MM, ZFS6050MM) correspond to the housing and sealing design. The ZF9000 and 6000 series group these sizes; each complete part number identifies a construction combination. To choose, provide the complete part number shown on the nameplate or drawing.

These housings are used in belt and chain conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment. In Argentina they are common in food plants, cement plants, tanneries, effluent treatment plants and packaging lines, where the bearing is mounted on a vertical or horizontal flange and takes moderate radial and axial load. They are also used in older machines where the complete housing is replaced to restore alignment.

To select the housing, verify the shaft diameter, the flange hole spacing and the bolt circle diameter. Check the sealing type: versions with single or double lip seals retain grease and keep out dust and water. Internal clearance and lubrication must match the inserted bearing; do not mix seals of different designs on the same equipment. During mounting, rest the flange on a clean, flat surface, tighten the four bolts in a cross pattern and check alignment with a straightedge or dial indicator before starting up.

Rexnord flange housings are interchangeable with those of other brands that follow the same flange dimensions and shaft diameter. Interchangeability is not automatic: center height, inner ring fastening type or sealing may vary. A compatible alternative is sought by dimensions and load capacity. MR Accesorios Industriales will indicate the option that best suits your equipment.

If you need a Rexnord ZFS flange housing, send the complete part number by WhatsApp to MR Accesorios Industriales. We will quote it promptly and, if applicable, indicate the compatible alternative. We can also evaluate in-house manufacturing of special housings to drawing.