Flange bearing 4 holes REXNORD ZFB6065MM

REXNORD ZFB6065MM is a flange bearing 4 holes reference, within Bearing housings. Request a quote for ZFB6065MM via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Rexnord four-bolt flange housings are mounted bearing units that fasten to a flat face with four bolts, with the shaft passing perpendicular to the mounting plane. They are used when a shaft needs to be supported with a rigid, low-profile flange, in equipment where a pillow block housing does not fit or is not suitable. MR Accesorios Industriales supplies them in Buenos Aires, Argentina.

The designation of these housings is read in blocks. The letters ZFB identify the four-bolt flange family; the first digits indicate the series and size, and the MM suffix indicates the mounting variant. Thus, ZFB2060MM and ZFB2070MM belong to the 2000 series, while ZFB6060MM, ZFB6065MM, ZFB6070MM and ZFB6075MM correspond to the 6000 series. Within each series, the number increases with the load capacity and the shaft diameter the unit accepts.

In Argentine industry they appear in belt and chain conveyors, elevators, mixers, blowers, packaging lines and water treatment equipment. The four-bolt flange allows them to be mounted on folded sheet metal, profile frames or machine housings, with the shaft exiting perpendicular to the surface. They are also chosen in applications where the pillow block housing has no firm support or where the assembly must be centered with respect to an opening.

To select correctly, first define the shaft diameter and the series, then verify the hole spacing and the mounting circle diameter. Check the sealing according to the environment: dust, water or washdown require tighter seals. During mounting, seat the flange on a clean, flat surface, tighten the four bolts in a cross pattern and verify shaft alignment before lubricating. A poorly seated flange generates axial load and shortens bearing life.

Mounted bearing units are interchanged between manufacturers by shaft number, series and flange configuration, not by part number. Two references from different brands may share mounting and sealing dimensions even if the nomenclature changes. If you need to replace an existing unit, send us the flange dimensions, shaft diameter and a photo, and we will indicate the compatible alternative.

If you are looking for a variant you do not see among these references, write to us on WhatsApp with the part number or model you need. At MR Accesorios Industriales we will quote it shortly and indicate the compatible alternative when applicable.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.