Product page
Flange bearing 4 holes REXNORD ZEPS9400YF
- Manufacturer Part Number
- ZEPS9400YF
- Brand
- REXNORDOfficial brand
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 9000
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
REXNORD ZEPS9400YF is a flange bearing 4 holes reference, within Bearing housings. Request a quote for ZEPS9400YF via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
Rexnord ZEPS housings are 4-bolt flange units from the 9000 series, designed to mount bearings and secure them to a flat surface. They are used in equipment where firm, aligned fastening is required, such as conveyors, mixers or pumps. MR Accesorios Industriales supplies this line for industrial plants in Buenos Aires and throughout the country.
The ZEPS designation identifies a 4-bolt flange housing from the 9000 series. The numbers that follow —for example 9311, 9315 or 9400— indicate the size and capacity of the unit. The YF suffix corresponds to the sealing and mounting configuration. These part numbers allow you to locate the exact reference within the Rexnord line.
In Argentine industry, these housings are used in belt conveyors, bucket elevators, mixers, agitators and process equipment. Their 4-bolt flange facilitates mounting on metal structures or masonry, and the incorporated bearing is protected against dust and humidity. MR Accesorios Industriales supplies them for food, chemical and bulk material plants.
To select the correct housing, take into account the shaft diameter, radial and axial loads, and environmental conditions. Verify that the flange matches the holes in the structure and that the sealing is suitable for the type of contamination. During mounting, align the housing with the shaft and tighten the bolts evenly to avoid stress. Lubrication must follow the manufacturer's instructions.
Rexnord ZEPS housings can be interchanged with units from other brands that share the same flange arrangement and shaft diameter. It is important to compare the critical dimensions —distance between holes, center height and shaft diameter— before replacing a unit. If you need an alternative, we will indicate the option compatible with your equipment.
If you are looking for a Rexnord ZEPS housing for your application, write to us on WhatsApp with the part number or the equipment dimensions. At MR Accesorios Industriales we will quote you promptly and advise you so you choose the right unit.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the ZEPS designation mean in Rexnord housings?
- ZEPS identifies a 4-bolt flange housing from the 9000 series. The numbers that follow indicate the size, and the YF suffix the sealing and mounting configuration. With that part number you can locate the exact reference.
- How do I choose the right housing for my equipment?
- You need the shaft diameter, radial and axial loads, and environmental conditions. Also verify the distance between flange holes and the center height. With that data we will advise you to choose the correct unit.
- Can I replace a housing from another brand with a Rexnord ZEPS?
- Yes, if the flange arrangement, shaft diameter and critical dimensions match. Compare distance between holes, center height and sealing type. If you send us the dimensions, we will indicate the compatible alternative.