Pillow block bearing REXNORD ZEPS2060MM

REXNORD ZEPS2060MM is a pillow block bearing reference, within Bearing housings. Request a quote for ZEPS2060MM via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Rexnord ZEPS housings are floor-mounted housings for mounted bearings, designed to support rotating shafts in power transmission equipment. They are used when the bearing is supported on a base and the shaft remains parallel to the floor, with the possibility of aligning and securing the assembly with bolts. MR Accesorios Industriales supplies this line as an official brand, with alternatives for different shaft sizes and sealing configurations.

The ZEPS designation combines the housing type with the mounted bearing series. The letters ZE identify the floor-mounted housing; the P and S refer to the sealing and locking configuration; the number that follows indicates the series and size. In the examples ZEPS2035MM, ZEPS2040MM and ZEPS2045MM, the numeric segment increases with shaft diameter: 2035, 2040 and 2045 correspond to different commercial sizes within the same family. The MM suffix indicates the sealing system and mounting variant. The 2000, 5000, 6000 and 9000 series group different capacities and applications, and each maintains its own numbering logic.

These housings appear in belt and roller conveyors, bucket elevators, mixers, mills, screens and process equipment in food, chemical and aggregate plants. In Argentina they are found in packaging lines, water treatment plants, sugar mills and poultry facilities, where a humid or dusty environment requires a robust housing and reliable sealing. They are also used in industrial fans and horizontal-shaft centrifugal pumps, provided the base allows anchoring and leveling of the assembly.

To choose the correct housing, start with the shaft diameter and the type of load: radial, axial or combined. Check the sealing according to the environment: dust, water or frequent washdown require labyrinths or tighter lip seals. Lubrication must be compatible with the bearing and renewed according to the duty cycle. During installation, support the housing on a flat, rigid surface, align the shaft with the driven equipment and tighten the mounting bolts evenly. A slight misalignment is corrected with the inherent clearance of the mounted bearing, but it is advisable to verify with a straightedge or dial indicator.

Rexnord and Link-Belt share nomenclatures within the mounted bearing line, and many housing part numbers have equivalents in other brands. Interchangeability is not automatic: housing tolerances, center height and sealing system vary. Therefore, compare the complete designation, not just the shaft diameter. If you have the original equipment part number or the shaft size, send it to us and we will indicate the compatible alternative within the Rexnord line we supply.

MR Accesorios Industriales supplies the Rexnord ZEPS line as an official brand. If you need a housing for a particular piece of equipment, send the ZEPS part number or the shaft size by WhatsApp and we will quote it promptly. We can also advise you on the 2000, 5000, 6000 or 9000 series according to the load and working environment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.