Flange bearing 4 holes REXNORD ZEP6211F

REXNORD ZEP6211F is a flange bearing 4 holes reference, within Bearing housings. Request a quote for ZEP6211F via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Rexnord ZEP F housings are 4-bolt flange mounted bearings used to support rotating shafts on flat structures, with a flange that bolts directly to the surface. They are used in equipment that requires firm, compact fastening, such as conveyor belts, mixers, pumps and fans. MR Accesorios Industriales supplies this Rexnord line in Buenos Aires, Argentina, and advises you on choosing the correct part number for your application.

The designation of these housings combines the series with the size and the mounting type. In the examples ZEP5207F, ZEP5208F, ZEP5211F and ZEP5212F the 5000 series appears; in ZEP6206F, ZEP6207F, ZEP6211F and ZEP6212F, the 6000 series. The final letter F indicates a 4-bolt flange. The middle numbers identify the shaft diameter and the housing size. The 9000 series is also part of this family, with its own combinations of dimensions. To request a quote, send us the complete part number shown on the equipment or on the drawing.

These mounted bearings are used in the food, chemical, cement, paper and aggregate processing industries, among others. In Argentina you will find them in belt conveyors, bucket elevators, agitators, dryers, mills and pumping equipment. The 4-bolt flange allows them to be mounted on sheet metal or profile structures, with simple alignment and good load distribution. They are also used in older machines where an original housing needs to be replaced without modifying the base.

To select the correct housing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. If there is dust, water or frequent washdowns, a more robust seal is advisable. Check the alignment of the flange with the mounting surface and tighten the bolts in a cross pattern to avoid deforming the housing. Lubrication must be the one specified for the operating temperature, and the internal clearance must be suitable so that the bearing does not run under strain.

Rexnord ZEP F housings can be interchanged with other brands that use 4-bolt flange systems, as long as the flange dimensions, shaft diameter and mounting type match. A similar part number is not enough: you have to compare the hole spacing, the flange diameter and the center height. If you cannot find the exact equivalent, at MR Accesorios Industriales we will point you to the compatible alternative or manufacture it to measure.

MR Accesorios Industriales has more than 80 years in the industry and supplies the Rexnord line in Buenos Aires, Argentina. If you need a ZEP F housing, send us the part number on WhatsApp and we will send you a quote shortly. We can also advise you if you have doubts about the series or the size that best suits your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.