REXNORD ZEP6070MM pillow block bearing
- Brand
- REXNORD
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 6000
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
REXNORD ZEP6070MM is a reference of pillow block bearing, within Bearing housings. Request a quote for ZEP6070MM via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
Rexnord ZEP MM housings are pillow block mounted bearing units designed to support rotating shafts in equipment where alignment and firm holding are critical. They are used in conveyors, elevators, mixers and process machinery. MR Accesorios Industriales sells this line as a brand and helps you choose the correct variant according to shaft diameter, mounting type and working conditions. Send us the part number by WhatsApp and we will quote it.
The ZEP MM designation is read in blocks: the letters ZEP identify the pillow block housing family, and the four digits that follow indicate the shaft size and mounting type. For example, ZEP2030MM, ZEP2035MM and ZEP2040MM share the 2000 series and change the nominal diameter; ZEP2050MM, ZEP2055MM, ZEP2060MM and ZEP2065MM cover larger steps. The MM suffix indicates the sealing and mounting variant. With the complete part number the part is defined without ambiguity.
These housings are seen in food and beverage, cement, mining, aggregate processing and material handling plants. In Argentina they appear in belt conveyors, bucket elevators, horizontal mixers, blowers and packaging lines. The 2000 series is the most widespread due to its capacity-to-size ratio; the 5000, 6000 and 9000 series cover more demanding applications. If your equipment works with dust, humidity or frequent washdowns, it is advisable to review the sealing before defining the replacement.
To select correctly, start from the shaft diameter and the mounting type required by the equipment. Check the alignment between housings: a poorly supported base or a misaligned shaft shortens bearing life. During mounting, tighten the bolts progressively and check axial clearance. Lubrication must be the one indicated for the working temperature and speed; if there are washdowns or fine dust, choose the sealing that best contains contamination. If in doubt, send us a photo of the housing and the engraved part number.
Mounted bearing housings are interchanged between brands by part number and by critical dimensions: shaft diameter, distance between mounting centers, height to center and base type. It is not enough for the part number to be similar: those dimensions and the sealing system must be compared. At MR Accesorios Industriales we indicate the compatible alternative, and if a special part is needed, we quote it to measure.
MR Accesorios Industriales sells Rexnord as a brand. If you need a ZEP MM housing for your equipment, write to us by WhatsApp with the complete part number, the shaft diameter or a photo of the part. We will quote it shortly and help you confirm that the chosen variant is the correct one for your application.
Dimensions
- Bore
- 70.00 mm
Frequently Asked Questions
- How do I identify the ZEP MM housing I need?
- Look for the part number engraved on the housing or on the equipment plate. If you cannot find it, measure the shaft diameter and the distance between the mounting holes. With that data and a photo we will indicate the corresponding ZEP MM variant.
- What is the difference between the 2000, 5000, 6000 and 9000 series?
- Each series groups housings of different capacity and size for different shaft diameters and loads. The 2000 series is the most commonly used; the higher series are chosen when the equipment requires greater robustness or more severe conditions.
- Can I replace a housing from another brand with a Rexnord ZEP MM?
- Yes, by comparing shaft diameter, distance between mounting centers, height to center and sealing type. With those dimensions verified we will indicate the equivalence. Send us the data by WhatsApp and we will quote the Rexnord option that best suits you.